CHINA GOODSTABILITY TECHNOLOGY CO.,LTD.,is specialized in wire harness processing equipment and non-standard automation equipment, research and development, production, sales, and service as one of the integrated enterprises. 

Overview Quick Details Place of Origin:China Brand Name:GST Model Number:RF-19F Usage:Twisting Name:Ground wire twisting machine Equipment Size:L340xW190xH170mm Motor Power:10W speed 1400 rpm/s Weight:12KG Power supply:AC220V/110V 50HZ Equipment Power:1100W Air pressure:1.5-2.5kg/C㎡ Packaging & Delivery Selling Units:Single item Single package size: 70X80X122 cm Single gross weight:12.000 kg Package Type:wooden packing up Lead Time: Quantity(Sets) 1 - 1 >1 Est. Time(days) 7 To be negotiated Features All kinds of ground wires, braided wires and isolation wires can be tightened, completely replacing manual work. The gripping hand adopts pneumatic control. When the air source is connected, the gripping hand will automatically open. When working, only need to hold the wire in, and lightly turn on the foot switch to complete the twisting operation. The automatic gripper adopts an exposed design, so that the scattered copper wires are also easily placed. There is no need to adjust the elastic thread when the thread diameter is different. This model is an upgraded version of the gas-electric twisting machine. Newly added automatic wire drawing device, short training time for novices. The opening size of the chuck can be adjusted. Loosen the chuck spindle screw inside the machine, move the entire chuck to the motor direction and then tighten the spindle screw to expand, and vice versa. The clamping force of the chuck can be increased to 5 to 6 springs by the spring force. If there is a phenomenon of sliding outward when twisting the thick thread, a small groove should be repaired in the center of the chuck, and the size of the groove can be based on the size of the thread.

https://www.wiresmachines.com/new-design-factory-direct-semi-automatic-wire-twisting-machine-wire-machine-twisting.html