Product features and advantages

BimuroPro 150 can be used to control the fouling of membrane separation system and reduce particle clogging.

Can control the formation of calcium carbonate, calcium sulfate, barium sulfate, etc..

It can prevent the scaling of calcium carbonate when LSI reaches 3.

BimuroPro 150 applies to all major reverse osmosis membranes.

No adverse effects on the environment, especially suitable for the district where has special requirements on wastewater discharge.

Typical properties

Appearance                                                 Clear light yellow liquid

Specific gravity                                              1.15±0.05

pH(5% water solution)                                        2.5±0.5

Viscosity（25℃）                                           1.79TP

Storage temperature                                         ≥-12℃

Adding and controlling

BimuroPro 150 should be continuously added to the last level security filter. This product should be injected into the water supply pipe by diluting water tank or packing barrel. The operation parameters of the specific dosing ratio depends on the water quality and membrane system.You can ask dosing software or technical personnel determined.

Safety

Do not touch eyes and skin.More information please see the MSDS.

Packing

Conventional packaging for 25kg plastic barrels or IBC barrels. If you have special needs, please contact your sales consultant.