Adhesive lined heat shrink tubing with environmental sealing capability for a wide variety of electrical applications, including automotive and marine wire harness, wire splices, breakouts, and connector-to-cable transitions.
Features

1. 3:1 shrink ratio
2. Low longitudinal shrinkage
3. Flame retardant (out jacket only)
4. Super sealing against water, moisture or other contaminates
5. Continuous operating temperature : -45℃-125℃
6. Shrink Temperature:125℃
Technical Data
Property Test method Standard Performance
Tensile strength(MPa) ASTM D 2671 ≥ 10.4
Elongation(%) ASTM D 2671 ≥ 300
Tensile strength after aging(Mpa) UL224 158 ℃*168hr ≥ 7.3
Elongation after aging (%) UL224 158 ℃*168hr ≥ 200
Flammability ASTM D 2671 B Self-extinguish within 30s
Dielectric strength(kV/mm) IEC 60243 ≥ 15
Volume resistivity( Ω .cm) IEC 60093 ≥ 1*1014
Adhesive
Property Test method Standard Performance
Water Absorption ASTM D 570 ＜ 0.2
Softening Point( ℃ ) ASTM E 28 95
Strength of pearing (PE) ASTM D 1000 120N/25mm
Strength of pearing (Al) ASTM D 1000 80N/25mm