CSD200A Truck Mounted Water Well Drilling Rig with Air Compressor

Model: CSD200A 

Type: Truck Mounted 

Max.Drilling Depth: 200m

Drilling Method: Air Drilling & Mud Drilling

 

CSD200 Series Multi-Functional Truck Mounted Water Well Drilling Rig is a efficient, multi-function full hydraulic water well drilling rig. It is high efficiency because of having a larger torque of the turntable and is mainly used for water well in industry and agriculture, national defense building foundation, geological exploration, geothermic well and other foundation working, it is popular at home and abroad.

 

CSD200 Series truck mounted drilling rig can drilling in all kinds formations by mud drilling in soft formation and air DTH hammer in rock drilling, DTH Hammer is applied in rock drilling, slag is discharged by air pressure and the offstage efficiency is ten times than traditional rotary drilling.

 

CSD200 Series deep water well drilling rigs, in cutting drilling or rotary drilling can be operated in unconsolidated layer, and the slag can be discharged under by mud, the impact drilling operation can also be adopted and slag can be discharged by pressure air, the hydraulic water well drilling rig suitable for drilling complicated geological conditions.

 

Characteristics:

1. The drilling rig can use air DTH Hammer drilling and mud drilling.

2. Centralized control console is suitable for each manipulation and control. Rapid pulling and lifting reduce the auxiliary time and enhance the work efficiency. 

3. The truck chassis adopts the 4X2 special crane chassis of brand Kaima&Foton and the main drive system, the transfer case, gearbox, double-winch unit, mud pump, turntable,drilling tower, feed system are set up on the chassis.

4. It's a hydraulicrotary drilling rig with directional circulation. It is equipped with BW250 mud pump which adopts the slurry as the washing fluid and can drill on clay, sand and rock if it is equipped with suitable drilling bit.

5. The power of drilling rig comes from a diesel engine, 70KW Yuchai engine drives the large displacement high pressure plunger pump and it is characterized by powerful dynamic and stable performance.

6. The rotary head,rotation speed is 0-100rpm stepless adjustment and the rotary torque is 3050-6100Nm.

7. The pulling force can be regulated and controlled, which adapt the machine to deep hole drilling.

8. It can set up a generator which is convenient to welding or illuminate for work at night.

9. Main winch are available on the rig so it is high efficiency when the rig drill on mud rock and on the weathering formation.

10. The main drive of rig is hydraulic and the four landing legs and drilling tower are hydraulic controlled. Transfer case and mud pump clutch system are also hydraulic operated.  

11. The Hydraulic auxiliary functions are easy and efficient for guide extension, boom swing, boom lift, guide dumping.

12. Competitive in price, low cost of maintain.

 

Specification:

1	Geology drilled		All kinds
2	Drilling Type		DTH & Mud Rotary
3	Drill system and operation		Hydraulic
4	Hole Diameter	mm	Φ140—Φ450
5	Hole Depth	m	300
6	Rotation Torque	Nm	3050-6100
7	Rotation Speed	rpm	60-120
8	Drill pipe diameter	mm	89/102/114
9	Drill pipe length	mm	3000/4500
10	Max.Pull down capacity	T	85KN
11	Max.Pull back capacity	T	16
Winch
12	Lifting force of Main winch(Optional)	T	5
13	Lifting force of hoist	T	1.5
14	Length of steel wire rope(tool winch)	m	100
15	Lifting height of tool winch	m	7.5
Engine
16	Diesel Engine type	YUCHAI
17	Rated Horse power	Kw	70
18	Electrical System	Volt	24
Compressor
19	Brand	KAISHAN	LGZJ18/17
20	Compressor Type	Rotary Screw/Movable
21	Pressure Required	Mpa	17
22	Air consumption	m³/min	18
Truck
23	Manufacturer		DONGFENG
24	Model		EQ1208G7
25	Engine		WD615.47
26	Rated Horse power	kw	273
27	Discharge Standard		EU-2
28	Drive type		6*4
29	Max.Speed	Km/h	93
30	Steering wheel		left/right(Optional)
Mud Pump
31	Type		Hydraulic
32	Model		BW250
33	Stroke	mm	110
34	Displacement	L/Min	250
35	Discharge pressure (Mpa)	Mpa	4
Dimension
36	Net Weight	T	19.8
37	Shipping Length	mm	11500
38	Shipping Width	mm	2480
39	Shipping Height	mm	3550
40	Working size（L*W*H）	mm	11000*2480*6350