Description:

100% complete machine patch, wave soldering, stable performance, good consistency.

Embedded CPU chip (MCU), more intelligent, lower power consumption.

Automatic power set memory (MCU built-in EEPROM memory unit).

Control accuracy of 0.1 degrees Celsius. Have been tested for stability, consistency and reliability.

Specifications:
Model: W1209
Dimensions: 49*40*16mm (L*W*H)

60*50*22mm (L*W*H with Acrylic case)
Temperature Control mode: ON / OFF
Temperature Range :-50 - 110 ℃
Resolution: When temperature is 0.1 degree, the resolution is -9.9~99.9, other temperature segment is 1 degree.
Control Accuracy: 0.1℃
Refresh Rate: 0.5s
High Temperature Protection 0 - 110 degree centigrade
Supply Voltage: DC 12V
Static Current: Less than 35MA, attract current less than 65MA
Output Voltage: DC 12V
Output: 1 Channel Relay, 10A
Measurement Input: NTC (10K 0.5%) Waterproof Sensor
Environmental Requirements: -10 - 60 degree centigrade; Humidity 20% - 85%

Instructions for use:

Connect the power supply and equipment to supply power to the controller. At this time, it is displayed as the measured temperature. Press the set key once, the display screen temperature flashes, and press + － to set the required temperature (press and hold + － to rise and fall quickly). After setting, press set to confirm and return. At this time, the controller automatically performs relay on and off according to the setting! The output of the temperature controller is a 20A relay to meet various high-power loads. Connect the control circuit to supply power to the temperature controller. At this time, the display screen displays the ambient temperature.

Long press set for 5 seconds to enter the main menu setting, press + － to switch P0... P6, long press set or no key action for 10 seconds, and the controller will automatically confirm and return.