Rc-uvc-560-immersion ultraviolet sterilizer

Sterilization principle: after absorbing ultraviolet light, microorganisms will cause some changes in the molecular structure of nuclear proteins in their cells, resulting in protein denaturation and breakage on the DNA chain, destruction of cross-linking in DNA molecules, hydration on cytosine and uracil, and even dimer on adenosine, Because dimerization destroys the normal pairing of purine and pyrimidine, it changes the biological activity of DNA. As a result, it will lead to the obstacle of microbial metabolism, which can not proliferate and produce cells and destroy them; Cause the synthesis obstacle of protein and enzyme in the bacteria, lead to the change and destruction of structure and function, so as to kill the microorganisms and achieve the purpose of disinfection and sterilization.

Rc-uvc-560 - installation and commissioning of immersion ultraviolet sterilizer:

1. It shall be installed horizontally (vertical installation is strictly prohibited).

2. The cylinder shall not bear external pressure.

3. It shall be installed at the outlet of the water tank or tower. If the water volume is large, the water pressure is high or the pipe network is too long, it is better to install it on the water transmission main (Branch) pipe close to the user.

4. Extending outward from both ends of the ultraviolet sterilizer, a space of ≥ 1m and ≥ 0.4m shall be reserved respectively to facilitate the replacement of lamp tubes. A barrier free space of 0.6m shall be reserved in front of the control panel of the ultraviolet sterilizer to facilitate maintenance.

5. No matter one or more ultraviolet sterilizers are selected in parallel, bypass pipeline and stop valve shall be installed to facilitate maintenance.

6. Reasonably select the installation position and pay attention to the waterproof and moisture-proof of the electric control part.

7. Select the power socket, wire or terminal block for connection according to the voltage and power marked on the nameplate.

8. Quartz glass sleeve and ultraviolet lamp are valuable and fragile products, and collision shall be avoided in transportation, installation and use.

Immersion ultraviolet sterilizer is an immersion ultraviolet sterilization lamp used in secondary water supply tank. Installation method: water tank drilling and fixed installation. The utility model has the advantages of simple structure, integrated setting of the whole device, good sterilization effect, easy replacement of ultraviolet lamp tube, safety and reliability. It is a sterilization device used in high-rise water tank and reservoir. The ultraviolet sterilization lamp can be placed in a closed reservoir to immerse the lamp tube and plug in the power source.

Precautions for immersion ultraviolet germicidal lamp

1. This product must be used in combination with leakage protection device.

2. Before using this product, it is necessary to check whether the outer glass and the built-in lamp tube are damaged or abnormal (such as water ingress and burning). In case of water inflow during use, the use shall be stopped immediately to avoid accidents.

3. This product has a built-in ultraviolet lamp. Ultraviolet radiation is harmful to human eyes and skin. Don't look at each other when the lamp is on.

4. The ballast shall be installed externally. Please isolate it from the water source and keep it dry.

5. In case of accidental rupture when installing this product, the human body should be prevented from inhaling the toxic substances evaporated by the mercury in the lamp tube.

Instructions for immersion ultraviolet germicidal lamp

1. Working voltage: AC 220 ± 10% (50Hz / 60Hz), working temperature rise TEM < 60 ℃, ambient temperature 20-30 ℃.

2. This product has a built-in high-quality ultraviolet lamp. At the initial stage of ignition, due to the incomplete evaporation of mercury in the tube, the arc will flicker unsteadily. This is a normal condition. It will stabilize after lighting for several minutes. Please rest assured.

3. The built-in ultraviolet lamp of this product can produce a large number of ultraviolet rays with the wavelength of 253.7nm, and has strong spectral sterilization ability. This band spectrum can effectively (remove algae) kill bacteria and viruses in water.

4. The product can be extended into water for 360 ° sterilization (irradiation range: 0.5m diameter)

5. With normal use of this product, the bactericidal efficacy can last for one to two years.

6. Non professional maintenance personnel are not allowed to disassemble this product. All products have been inspected before leaving the factory.