Product Application

Our led strip gluing machine Widely used in LED lighting modules, LED display, LED flood lights, LED soft and hard light strips, fluorescent lamps, wall washers, waterproof power supplies, resistors, capacitors, photo albums, and other products.

 

Introduction :

1. Working Area: 400x5000x30/80mm

2.Application products: LED flexible strip

3.High precision valve: high speed, glue off clean, no glue drawing, no dropping.

4. Gear pump

5. Mix glue A & B more evenly; no more or no less for agent B.

 

Name: Fully Automatic Glue Dispensing Machine

Model: PGB-5100 Advised Glue: two-component silicone, epoxy, PU, etc.

Ratio: 1:1 to 10:1 adjustable

Glue Color: transparent

Glue Type: no additives inside

Application: LED flexible strip 5m long Machine

Type: special for LED Strip 5m

 

Tech Data:

1.Gluing Speed: 0.2-12g/S

2.Repeatability: +/-1%

3. Glue Ratio: 1:1 to 10:1 adjustable

4. Tank Capacity: 10L, 25L, 40L available

5. Size: L6000xW1200xH1500mm

6. Weight: 810kg

7. Power: 1.5-3kw, Voltage: 220V & 380V optional

8. Air Pressure: 0.5-0.65MPa ( 5-6.5kgf/ cm2 )

 

 

1. High ratio between the base agent and hardener, ( the most common ratio is 10:1);

2. Transparent.

3. Need to vacuum to remove the air bubble inside

4. Not easy to mix the two components evenly.

5. Running Path is long. Have special requirement on metering pump.

 

1. Gluing Effect: high evenness; can not be r ed;

2. High precision for mixing of glue A and glue B. ( Glue B can not be more or less than required quantity)

3. Thickness of Glue: must be suitable.

4. Position: the nozzle must focus on the middle of PCB bar.

5. Capacity must meet up the customer’s requirement.

 

III.Specification:

Model No:	pgb-5100
Mixing Ratio	100:100-10:100(1:1-1:10) Adjustable
Metering precision	±1%
Outflow speed	1g/sec-15g/sec
Mixing precision	±1%
Mixing mode	Dynamic mixing /Static mixing
Glue Viscosity	Lower than 20000 CPS(mPa·s)
Control mode	PLC + Touch Screen
Control system	Independent R&D
Measuring mode	Stepping motor/High-precision, wear-resistant,long-life Gear pump
Working voltage	AC 220V 50Hz/60Hz
Power requirement	3.55KW
Air pressure requirement	4.5-8KG
Machine Dimension	1500(L)*1200(W)*1500(H)mm
Weight	approx 260 KG
Work environment	Humidity: 20%~98%RH; Temperature: 0~+40°c

 

 

 

Suitable Material: For waterproof, adhesive, fixed two-component adhesive.

Such as: Crystal or less additive glue --Silicone, epoxy, polyurethane(PU), etc.

Applications:LED products ,Crafts,Electronic components

Such as:Wall washer light, LED bar, LED strip, Ads module, Sensor, Photovoltaic module, Photovol­taic inverter .etc

Application