How to put the car wash mud when not in use?

Car wash mud can be regarded as a tool for further cleaning of the car body, which can remove some stubborn stains on the car body, such as bird droppings, tree sap, tar, flying paint, and some substances that are naturally oxidized by the car body. It is often used in some car wash shops. A good car wash mud can be reused many times. It should be stored when not in use. How to store it in order to continue to use it next time?

There are two ways to store the car wash mud when it is not in use: 1. After washing the car wash mud, soak it in clean water; 2. After washing the car wash mud, dry it, seal it with a plastic bag or container to isolate it from dust, and store it in a cool place. If it is poor quality car wash mud, this is generally an ordinary raw material with harder hardness and will slowly melt when it meets with water. You can choose the second way to store it.

After the car wash mud is used, it will slowly turn black. When you need to use it, rub the dirty side into it, change the clean forehead and continue rubbing it. When the car wash mud loses a certain amount of viscosity, it can be discarded directly.

First rinse the body with plenty of water to remove dust and fine sand on the surface of the body. High-pressure water gun + spray pot is recommended. When washing the dusty lower part of the car body, you can change the car wash gloves/sponge to clean it.

Then use the car wash mud and car wash cleaning fluid for "deep cleaning". The paint surface of the cleaned part needs to be wetted and lubricated with the cleaning fluid, and then the car paint can be cleaned with the car wash mud, sliding back and forth in a straight line without pressing hard, no particles Feel it. If it is stained with fine sand, you need to rub this side in, and use the other clean side to spray the cleaning fluid and scrub. If it falls on the ground, it cannot be reused.

Car Manual Wash Tools Clay Bar Auto Cleaning Detailing Magic Mud