Zetin Silicon Carbon Zirconia Sintering Furnace 

ZTCF-30B SiC

Introduction

The Zetin Siliconit sintering furnace is equipped with SiC rod heating elements, and there is no pollution during the sintering process. its sintering speed is 5 times higher than the ordinary sintering furnace, and the sintering effect is perfect, the temperature control is accurate, the internal temperature of the furnace is uniform, and the automatic lifting tray design has good sealing performance. At the same time, there is also a program with ordinary sintering speed, which can be operated flexibly according to individual actual conditions and improve work efficiency.

Features

• The whole speed sintering process only need 2.5 hours (including heating ,heat hold, and cooling), one time can sinter 80 units crowns.
• Using normally sintering program one time can stack 3 crucibles , and total can sinter 150 units.
• Special SiC rods for dentistry, with transparent and round sintering color, pollution-free, maintenance-free, and almost no phenomenon such as unsintering well and inaccurate color.
• PID intelligent temperature control system ensures the high temperature control accuracy. The actually temperature error at ±1℃.
• Can Store 40 Programs.
• 7-TFT touch screen can fully display all the operations, so very easy to set up the program, friendly human-machine interface.
• Longer service life Insulation materials with good thermal insulation effect ensures a uniformity temperature circumstance.
• With power-off memory function, it can start working from any phase of any program.