KS-3981 is a special wax castable resin for 3d printers that is very similar to wax. It is used for jewelry casting and most specifically for models with stone settings and surface models.

This resin has 100% ash-free burnout and provides top quality direct casting using a standard burnout cycle.

• Designed specifically to easily set stones on printed model

• Get perfect smooth surfaces also for large surface jewelry

• Same as wax properties and texture

• 100% Ash-free burnout for direct casting

This special resin can be used for any type of DLP or LCD curing 3d printer. It has fast curing properties depending on the 3d printer used.

• Fast curing properties for fast printing

• Suitable for 405nm wavelenght 3D printers

•  

• The wax content determines the casting value. After the product is cast, the value is processed at high temperature, and the value is 100% gasified, or the residual value is 0.1%, or 0.2%. There is a different difference, that is, if the wax content is a little higher, the gasification effect will be better.

•  

Photosensitive resin is UV resin, which is composed of polymer monomer and prepolymer, in which light (ultraviolet) initiator or photosensitizer is added. It will immediately cause polymerization reaction and complete curing under ultraviolet irradiation of a certain wavelength. Photosensitive resin is generally liquid and is used to make materials with high strength, high temperature resistance, waterproof, etc, Photosensitive resin 3D printing is commonly used in domestic mainstream SLA rapid prototyping equipment, most imported or domestic LCD, DLP desktop, etc.