Features:
- Handy Setup to Helium Network. 6 steps, 5 minutes, ready to go.
- Powered by Mature Hardware Solutions. Raspberry Pi 4(2G/4G/8G RAM) and WM1302/WM1303 (Semtech SX1302/SX1303) baseband LoRa chip.
- Secured and Reliable. Built-in ECC608 crypto chip, high-security authentication, and reliable connectivity.
- Automatic Online Upgrades. Automatic OTA upgrades, without manual operation.
- Remote Diagnosis. Built-in remote diagnostics mechanism, efficient online support.
- 64GB Large Storage. 64GB MicroSD card large storage, extending the lifetime of the gateway, fulfilling the memory requirement of potential upgrade.
- Efficient Cooling Solution. Aluminum enclosure with a heatsink and cooling fan inside, ensuring long-term and stable operation.
- FCC and CE Certificated. Available for personal and commercial use.
Specifications
Processor
|
Raspberry Pi 4 (Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz)
|
RAM
|
2GB / 4GB / 8GB
|
Storage
|
64GB MicroSD Card
|
Frequency
|
EU868 Version: 863MHz ~ 870MHz
US915 Version: 902MHz ~ 928MHz
|
Sensitivity
|
-125dBm @125KHz/SF7
|
-139dBm @125KHz/SF12
|
TX Power
|
Up to 26 dBm
|
Antenna Gain
|
US915: 2.6 dBi
EU868: 2.8 dBi
|
Antenna Impedance
|
50 Ohm
|
Antenna Radiation Pattern
|
Omni-Directional
|
Wi-Fi
|
2.4 GHz and 5.0 GHz IEEE 802.11ac wireless
|
Bluetooth
|
Bluetooth 5.0, BLE
|
LoRaWAN
|
Supports Class A, C
|
Input Voltage
|
DC 5V - 3A
|
Interfaces
|
USB Type-C (Power Supply) * 1
Ethernet RJ45 * 1
RP-SMA Female Antenna Connector* 1
|
Operating Temperature
|
0°C to 50°C
|
Relative Humidity
|
0% - 90% (non-condensing)
|
Heat Dissipation
|
Aluminum enclosure, a heatsink, and a cooling fan
|
IP Grade
|
IP20
|
Certification
|
FCC / CE
|
|
|