Popular Manual and Automatic Car Sealed Lead Acid Battery Charger 12v24v GEL

Parameters:
1. Input Voltage: 110—230V
2. Output voltage: 12V/24V
3. Current:10A peak for 12V,8A peak for 24V
4. Suitable capacity: 30-120AH
5. Power:160W
6. Frequency: 50-60HZ
7. Length of output wire:65cm
8. Length of input wire:125cm
9. Dimension: 14*19*7cm
10. Gross weight: 0.9kg
11. Application: best suitable for 40-120AH lead acid batteries(including wet and dry)
Multiple protections
Overheat protection: The charger will close automatically without current output for protective purpose when its temperature is over 105℃, and when the temperature is decreased below about 80℃ or power supply is shut down for 10 minutes, charging process can be resumed.
Short circuit protection: In case of accidental short circuit, the charger will close automatically without current output, and beep for alarming. Once correctly connected, charging process will be resumed.
Reverse connection protection: Whenever positive poles and negative poles of the charger and the battery are not connected correctly, the charger will close automatically without current output, and beep for alarming. Once correctly connected, charging process will be resumed.
Low voltage protection: When single cell voltage is below 1.5V, the charger can not be started up, and beep for alarming. This mechanism is to avoid possible damages caused up by voltage discrepancy between the battery and the charger.