RNU Hydraulic Swing Manifold Type Clamp Cylinder

 Introduction of product 
◆The bore of the cylinder are includingd32,Φ40,Φ50 andD63. Double acting lype.
The standard rotating angle is 90° and the optional rotating angles are including 0°, 45° and 609
◆The total stroke is equal to the sum of the swing stroke and the clamping stroke, and is usually
used within the clamping stroke.
◆The type of clamping are including single side swing clamping and double side swing clamping.
◆The material of the cylinder body is medium carbon steel.
◆Please don't exceed 1.5 times of the original length, if you need to increase the length of the 
clamping arm.