ER50-G Welding Wire

 

Specification	AWS	ER70S-G
	J I S	YGW15
	G B	ER50-G
Shielding Gas	80%Ar+20%CO2

 

Feature & Use：

( 1 ) Operating condition is wide, from low to high current. It is a kind of solid wire.

( 2 ) Containing special alloy, its arc is stable even in high current.

( 3 ) Adapt to 490 MPa steel , like ships, steel structures, and machinery etc.

 

Notice of ER50-G Welding Wire：

1. Please use specialized welding gas, eg: purity of CO2≥99.5%，H2O≤0.005%，Ar≥99.99%. Gas flow: 20~25L/min.

2. Wind affects arc and welding pool, please take steps to block the wind.

3. There is smoke when welding, pay attention to ventilation.

4. Distance between Tip and base steel is about 15mm when current is below 250A; and 20~25mm when current is above 250A.

5. Welding materials should be stored in dry places.

6. Please check the welder ,wire feeder, gas regulator and heater before operation.

7. Please keep the percentage of mixed gas stable and keep gas pressure stay the same.

8. As to thin steel plate, downward welding in the inclined position or forward welding is recommended,(pictures are followed below).

9. Please move plastic spool and basket spool in a correct way.

 

One chemical composition of deposited metal (wt%)：（80%Ar+20%CO2）

C	Si	Mn	P	S
0.08	0.42	1.04	0.016	0.025

Size & Current (DC+)：

Diameter (mm)		0.8	0.9	1.0	1.2	1.4	1.6
Current  (Amp)	PA	50 ~  180	50 ~  200	50 ~  220	80 ~  350	100 ~  470	200 ~  550
	EGW	50 ~  120	50 ~  140	50 ~  140	50 ~  160	100 ~  180	—
	PE	50 ~  100	50 ~  120	50 ~  120	50 ~  140	—	—

 

We are Welding Wire Manufacturer and provide Quality High Strength Steel Welding, Non Copper Coated Wire, Submerged Arc & Stainless Steel Welding Wire.If you are interested, please click here to contact us immediately.

 

https://www.sinoweldingwire.com/gas-shielded-welding-wire/er70s-g-welding-wire.html