Hydraulic Triple Ram BOP 

The Triple Ram BOPs are mainly recommended to apply in the Well which Working Pressure >10000Psi. Normally, the 3 sets of Ram Assembly of the BOP will be same size. Sometimes a special Ram Assembly such as Shear Seal Ram could be applied. In the meantime, it should keep the other 2 sets of Rams with same size.

Triple Ram BOPs or Dual Ram BOPs can be configured with the lower set of Rams inverted. This allows the two sets of Rams to trap a cavity full of grease between them of higher pressure, preventing escape up or down. The Triple Ram BOP applied in Wireline Operation and Slickline Operation are differ in Balance Valve and Ram Assembly normally. But if you need this BOP both fit with Wireline and Slickline Operation, we could provide this BOP accordingly.

Main Parameter

1) I.D.
2) Working Pressure
3) Wireline or Slickline Size you applied
4) Rams type you needed
5) Upper and Lower Union required ( Bowen or Otis )
6) Service Environment ( STD or H2S )
7) Working Temperature