Embossed Stainless Steel Welding

Different patterns are produced by pressing the surface of stainless steel sheet through a certain pattern mold. The embossing process can be performed on the basis of 2B or Mirror surface. The difference between them is that former is matte and the latter is bright. Generally, the basic material are 201, 304, 316Land 430. Our thickness range is 0.3mm to 2.5mm, and the standard size is 1219x2438mm and 1219x3048mm, what's more, we could do as coil if customer request.

APPLICATION

This surface is often used in public facilities, kiosks, indoor and outdoor decoration and elevator decoration. We could do many treatment on the embossed surface such as PVD and part PVD.

Raw material: We generally choose TISCO, BAOSTEEL, POSCO material because they are with high density and low hardness. The material surface will be nice, smooth, bright after polishing and they are more suitable to welding, cutting and bending.

Process Quality control: Firstly, the sheet is embossed by the embossing machine. After washing and drying, our inspector would check the surface quality under the light and coating the PVC film if quality is confirmed.

PVC: The standard PVC for Emboss surface is NOVACEL brand PVC imported from Germany with thickness of 0.07mm. (Other kinds of PVC could be supplied if customer asked.)

Package: Our package is fumigation wooden case which is table and suitable for sea transportation. (The Package could be specially produced per customers' request.)

Pre-delivery Inspection: We have standardized production process and pre-delivery inspection.

What's more, we have the ability to supply the material in middle and high-end quality and professional after-sales service for customers. 

SUNSONG Decorative Stainless Steel Sheets is neat and beautiful which widely used into kinds of outside decoration of buildings and elevator decoration. We could do many treatment on the Hairline surface such as etching, PVD and so on. The surface would be different and welcomed by customers.