POKETONE Polymer M33AG6A

POKETONE Thermoplastic Polymers are

aliphatic polyketones, a revolutionary new

class of semi-crystalline thermoplastics.

Hyosung developed new catalyst to produce

this unique polymer in 2013 and constructed

commercial plant in 2015, in Ulsan, Korea.

POKETONE Polymer M33AG6A is a 30

percent short glass-fiber-reinforced high-flow

injection moulding grade with mechanical

properties that classify it as an engineering

thermoplastic. This grade shows a unique

balance of toughness and high modulus

combined with good creep performance,

strength and elevated temperature performance.

This grade exhibits very good processability,

good impact resistance, high resilience and

good creep performance. POKETONE

Polymer M33AG6A can also withstand

short-term exposure to elevated temperatures.

Moreover this polymer exhibits high

resistance to hydrocarbons, solvents, salt

solutions, weak acids and weak bases.

POKETONE Polymer M33AG6A is a

high-flow, low-viscosity polymer that should

be considered for mouldings with long flow

paths or thin walls. This grade is very easy to

process on standrad injection moulding

equipment. Cycle times are generally short

and parts show good mould definition.

POKETONE Polymer’s low moisuture

sensitivity means that no conditioning of parts

before assembly or use is necessary.

Applications for POKETONE Polymer

M33AG6A may be found in the automotive,

electrical, electronics, undustrial and consumer

applicance markets.