WGJ1000 Solid float-type rubber boom Wear-resistant rubber boom WGJ1000 Ocean wharf Technical specification  

A purpose  

Booms are a necessary device to prevent water pollution.  The general method to deal with oil pollution in water areas is to enclose the floating oil with oil booms to avoid its diffusion and drift and concentrate it as much as possible. Then, appropriate physical methods are used to recover it as much as possible. Finally, the remaining parts that are difficult to recover are removed by chemical, physical or biological methods.  

Its body is made of high strength oil resistant rubber cloth. It has a high bearing capacity when it is subjected to strong pulling force at work.  Each section of the boom is connected by pressure plate and connecting rope, which is easy to operate and suitable for emergency action.  Other joints can also be used according to user requirements.  

Second, the structure of  

WGJ solid float type rubber boom is mainly composed of rubber body, solid float, counterweight block, connecting plate, handle and other parts, as shown in the figure below.  

1, rubber body: made of high strength, oil resistant rubber cloth vulcanization processing.  

2, solid float: foam plastic.  

3, weight block: cast iron processing, with bolts clamped on the main body.  

4. Joint: the steel plate with holes is fastened on the joint as a strengthening piece, and is connected with nylon rope cross perforation.  

5. Anchor seat: used to tie anchor rope.  

6. Handle: used for manual handling of oil boom.  

Three, main technical parameters and performance  

Type WGJ1000 no.  

Total height (mm) 1000  

Height above water (mm) 310  

Underwater depth (mm) 570  

The length of each section (m) is 20  

Tension resistance of boom (KN) 100  

Maximum wave height (m) 1.5  

Maximum flow rate (Kn) 3.0  

Maximum wind speed (m/s) 15  

Suitable temperature (℃) -40 ~ 70  

Packing size of each section (m) 1.2×1.2×1.4  

Total weight of each section (Kg) 180