The brass water pressure reducing valve is used to change the throttling area and change the fluid's flow rate and kinetic energy to prevent further pressure losses, achieving the goal of pressure reduction. The brass water pressure regulator with gauge is an automatic OEM brass ball valve that relies on the energy control of the medium itself and the adjustment of the regulating system to balance the fluctuation of the pressure behind the valve with the spring force so that the pressure behind the valve remains constant within a specific error range.

 

Brass Pressure Reducing Valve Details:

 

The adjusting pressure reducing valve produced by water pressure reducing valve manufacturers is usually positioned upright on a horizontal pipeline for ease of operation and maintenance.

Brass Pressure Reducer Specifications

 

CB-2004 Pressure Reducing Valve

 

Pressure	Medium	Temperature	Product Information
1.6MPa	water, steam, noncorrosive liquid	1. -20℃≤t≤80℃	1/2"	3/4"	1"	1-1/4"	1-1/2"	2"

 

 

CB-2150 Pressure Reducing Valve

 

Pressure	Medium	The highest temperature	Maximum inlet pressure	Product Information
1.6MPa	water	80℃	1.6MPa	1/2"	3/4"	1"	1-1/4"	1-1/2"	2"	3"	4"

 

 

CB-2105 Pressure Reducing Valve

 

Material	Pressure	Operating temperature	P/N	SIZE	H	B	L
Bronze	400psi	-10℃≤T≤110℃	21051	1/2"	117.6	41	98
			21052	3/4"	120.4	43.4	100.5
			21053	1"	120.4	54.6	119

 

CB-2106 Pressure Reducing Valve

 

Material	Pressure	Operating temperature	P/N	SIZE	H	B	L	D	N
Bronze	400psi	-10℃≤T≤110℃	12331	1/2"	120.4	45.9	91.8	12	9
			12332	3/4"	120.4	46.8	93.6	17	13.5
			12333	1"	120.4	50.3	100.6	21.8	18.2

 

CB-2203 Pressure Reducing Valve

 

Material	Pressure	Operating temperature	P/N	SIZE	DH	H	B	L
Bronze	400psi	-10℃≤T≤110℃	22031	1/2"	16.1	120.4	61.5	121
			22032	3/4"	22.2	120.4	63	124.5
			22033	1"	28.5	120.4	65.5	129

 

 

 

 

CB-2213 Pressure Reducing Valve

 

Material	Pressure	Operating temperature	P/N	SIZE	L	H
Bronze	400psi	-10℃≤T≤110℃	22131	3/8"	101.6	165.5
			22132	1/2"	105	165.5
			22133	3/4"	109	165.5
			22134	1"	112	165.5

 

 

CB-2213 Pressure Reducing Valve

 

Material	Pressure	Operating temperature	P/N	SIZE	H	B	C	G	L	F
Bronze	400psi	-20℃≤T≤180℃	22131	1/2"	130.3	35.2	43	41.2	134.5	23.39
			22132	3/4"	130.3	35.2	43	41.2	134.5	17.78

 

 

 

Brass Water Pressure Reducing Valve Benefits

The internal thread is connected to the brass pressure reducing valve, which has a compact size. The brass water pressure regulator with gauge is easy to install and other features, and with a built-in filter, which can facilitate the overall installation operation, avoid clogging by debris and make it safer and more reliable.

 

The unvented pressure reducing valve produced by our factory is a direct-acting adjustable pressure reducing valve. Using diaphragm type hydraulic operation can be installed horizontally or vertically in water supply, fire fighting system, or other clean water systems. The outlet pressure of the brass ball valves for water can be controlled to a relatively fixed value within a particular flow range. Both the dynamic and static pressure is reduced, and the operation is stable, with no noise, no vibration, water hammer reduction, and pipe network protection.

 

The proportional pressure reducing valve is suitable for installation at any angle. Lightweight, small size, convenient installation, and maintenance.

 

As a professional bronze valve manufacturer, we provide brass water heater drain ball valve, 3 4 in brass fpt water pressure reducing valve, 1 2 in brass fpt x fpt pressure reducing valve, 1 inch ball valve brass, etc. Want to know more, contact us.