Product description

The light body color: Black
The light color:warm white /cold white
The input voltage: AC 85--265V
power: small size: 12W
big plus: 18W / 30W / 36W
function:NO sensor / Radar senso / PIR sensor
Photosynthetic efficiency:135lm/W
Maximum current:300mA

Radar motion sensor parameters

Load Power:The most powerful200W
Input Voltage:AC85--265V 50/60Hz
Frequency Range:3.3GHz
Angle of induction:360°
Induction Distance :4--8m
Induction time delay:20s
Photosensitive Set:<20Lux
Induction Rate:0.5--3m/s
Induction Height:Maximum 4m

PIR sensor parameters

The most powerful:40W
Input voltage:AC85--265V 50/60Hz
Angle of induction:110°
Induction Distance:3--6m
Induction time delay:45s
Photosensitive Set:<10Lux
Installation Height:Maximum 3.5m

Product Function Description

Sconces do not work when the light is strong.In the evening, when the light is dim, when someone or a moving object enters the detection range of the sensor, the wall lamp lights up. After the person leaves, the wall lamp waits for 20-60 seconds and then goes off.

Warm prompt

1.Wall lamp installation height should not be too large.
2.In bad weather, wall lights can be misoperated, such as wind, lightning, heavy rain...
3.Do not install it too close to a tree. Shaking leaves can cause wall lamps to misoperate.
4.Wall lamp brown line is connected to live line, blue line is connected to zero line, wall lamp out after the faint light, brown line and blue line exchange connection.
5.When installing the two radar motion-sensing wall lamps, a sufficient distance should be kept to prevent interference between the wall lamps from misoperation.

Differences between PIR Sensor and Radar Sensor

1.The radar motion sensor is a built-in sensor that is not visible outside the wall lamp.The PIR motion sensor is an external sensor visible outside the wall lamp.
2.At night, a wall lamp can be lit by anything moving within range of radar motion sensors.For example, the swaying leaves,
3.At night, only humans or animals (which contain their own heat source) can light the wall lamp within range of the PIR motion sensor.For example, busy people, flying birds,