BANTE900P Portable Multi-parameter Water Quality Meter pH/Conductivity/Dissolved

Model:	BANTE900P
Brand:	GRAIGAR
Origin:	Made In China
Category:	Electronics & Electricity / Electronic Instrument / Analysis Instrument
Label:	PH Meter , Water Quality Tester , Dissolved Oxygen
Price:	US $700 / pc
Min. Order:	1 pc

Inquire Now

Product Description

bante900P multi-parameter meter is capable of measuring up to 9 water quality parameters, including pH, ORP, Ion, Conductivity TDS, Salinity, Resistivity, Dissolved Oxygen, etc.

General Features:
* Automatic Temperature Compensation ensures highly accurate measurements over the entire range.
* Calibration due reminder helps you to calibrate meter regularly.
* Automatic endpoint function freezes stable measured values.
* Help message as a operational guide to helps you understand how to use meter.
* Setup menu lets user customize the calibration points, stability conditions, date and time to meet measurement requirements.
* Expanded memory stores and recalls up to 500 readings.
* Built-in real-time clock stamps stored data to meets GLP.
* Stored data can be transferred into PC via USB communication interface.

Model	Bante900P
pH
Range	-2.000~20.000pH
Accuracy	±0.002pH
Resolution	0.1, 0.01, 0.001pH, Selectable
Calibration Points	1 to 5 points
Calibration Solutions	USA, NIST, DIN or User-defined
Temperature Compensation	0~100°C, 32~212°F
Compensation Mode	Manual or Automatic
mV
Range	-1999.9~1999.9mV
Accuracy	±0.2mV
Resolution	0.1, 1mV, Selectable
Calibration Points	1 point (Only for Relative mV mode)
Calibration Range	±200mV
Ion
Range	0.001~19999ppm, mg/L, mol/L (Refer to the range of ISE)
Accuracy	±0.5% F.S (Monovalent), ±1% F.S (Divalent)
Resolution	0.001, 0.01, 0.1, 1
Calibration Points	2 to 5 points
Calibration Solutions	0.001, 0.01, 0.1, 1, 10, 100, 1000, 10000ppm, mg/L, mol/L
Temperature Compensation	0~100°C, 32~212°F
Compensation Mode	Manual or Automatic
Conductivity
Range	0~20.00, 200.0, 2000µS/cm, 20.00, 200.0mS/cm
Accuracy	±0.5% F.S
Calibration Points	1 to 5 points
Calibration Solutions	10µS/cm, 84µS/cm,1413µS/cm,12.88mS/cm,111.8mS/cm
Temperature Compensation	0~100°C, 32~212°F, Manual or Automatic
Temperature Coefficient	0.0~10.0%/°C
Compensation Modes	Linear or Pure Water
Cell Constant	K=0.1, 1, 10 or User-defined
Normalization Temperature	20°C or 25°C
TDS
Range	0~100ppt (Max. 200ppt, depending on factor setting)
Accuracy	±1% F.S
TDS Factor	0.1~1.0 (Default 0.5)
Salinity
Range	0~10ppt (Max. 80ppt)
Accuracy	±1% F.S
Measurement Modes	Seawater or Practical Salinity
Resistivity
Range	0~100MΩ
Accuracy	±1% F.S
Resolution	0.01, 0.1, 1
Dissolved Oxygen
Range	0.00~20.00mg/L (or ppm)
Accuracy	±0.2mg/L
Resolution	0.01mg/L
Calibration Points	1 or 2 points
Temperature Compensation	0~50°C, 32~122°F, Automatic
Pressure Correction	60.0~112.5kPa, 450~850mmHg
Salinity Correction	0~50g/L
% Saturation of Oxygen
Range	0.0~200.0%
Accuracy	±2.0%
Resolution	0.1, 1%
Temperature
Range	0~105°C, 32~221°F
Accuracy	±0.5°C, ±0.9°F
Resolution	0.1°C
Calibration Points	1 point
Calibration Range	Measured value ±10°C
Others
Hold Function	Manual or Automatic
Stability Conditions	Low or High
Calibration Due	0 to 31 days
Power Off	Manual or Automatic (10, 20, 30 minutes)
Reset Function	Yes
Memory	Stores up to 500 data sets
Output	USB Communication Interface
Connector	BNC, 6-pin Mini Plug
Power Requirements	3×1.5V "AA" Batteries
Battery Life	Approximately 150 hours (Turn off the backlit)
Dimensions	170(L)×85(W)×30(H)mm
Weight	300g