Composition: inner pre-twisted wire, the outer pre-twisted wire, rubber insert, cast aluminum shells, right-angle shackle, U-type shackle.

 

Product Description

 

Let us go visit

 

Composition: inner pre-twisted wire, the outer pre-twisted wire, rubber insert, cast aluminum shells, right-angle shackle, U-type shackle.

 

 

Purposes: supporting cable, make the ADSS hang on the tower.

 

 

Features:

 

a, stress on average, no concentration stress, protect cable better.

 

b, good dynamic stress. It can provide enough grip strength(14%RTS)

 

c, rubber clip block make abrasion low .

 

d. rounded end improve the corona voltage

 

e. excellent aluminum alloy improve the mechanical and resist-corrosion function, extend life.

 

Technical requirements: meet the DL / T 766-2003 ADSS with the preformed helical fittings technical requirements and test methods.

 

 

 

Ordering Information:

 

A. Choose the suitable XC suspension clamp according to the outer diameter, span, rated tension strength of ADSS cable etc. parameters

 

B. the quantity configuration: 1 set / line tower.

 

C. if the clamp need to install the corona coils and vibration damper, the inner performed wire need to prolong

 

D. clamp strength: 30KN, 50KN, 70KN etc.

Specifications Parameter table for ADSS with the XC preformed Suspension clamp:

Model	For span (m)	Length of inner rods	Length of outer rods	Clamp quality (kg)
AXC-200-**	101-200	1200	1000	2.7
AXC-300-**	201-300	1300	1100	2.8
AXC-400-**	301-400	1500	1200	2.9
AXC-500-**	401-500	1700	1300	3.1
AXC-600-**	501-600	1900	1500	4.0
AXC-700-**	601-700	2000	1600	4.1
AXC-800-**	701-800	2100	1700	4.3

Note: **-- Cable diameter (mm)