It is used for aggressive grinding on hard materials with poor thermal conductivity, and the removal rate is the highest. Due to the self-sharpening of ceramic oxide particles, the performance has been very high.

 

Aluminium Oxide Ceramic Flap Wheel with Shank (CAO) Grit Size Table Corresponding To Raw Materials

 

Aluminium Oxide Ceramic Flap Wheel (CAO) Specification

Max. RPM: 6120~76300 RPM

 

Other Raw Materials: Aluminum Oxide(AO), Silicon Carbide(SC), Zirconia(ZR)

 

Grit Size(Ceramic Aluminum Oxide Combined): 80#/120#

 

Aluminium Oxide Ceramic Flap Wheel (CAO) Materials that can be Worked:

Aluminum

 

Cobalt-based alloys

 

Other non-ferrous metals

 

High-temperature-resistant materials

 

Nickel-based alloys (e. g. Inconel and Hastelloy)

 

Bronze

 

Hard non-ferrous metal

 

Titanium

 

Copper

 

Soft non-ferrous metal

 

Brass

 

Stainless steel (INOX)

 

Grey/nodular cast iron (GG/GJL, GGG/GJS)

 

Annealed cast iron

 

Steel, cast steel

 

 

Flap Wheels with Shank

Flap wheels with Shank is suitable for grinding small area, dead angle, inner hole surface, and slit gaps that are difficult to reach. The Features of the abrasive clothes are various with multipurpose application capacity. It is flexible and rich in tensile strength. It could remove the burr and uneven, rough surface with fast grinding force efficiently, meanwhile, can make sure the performance result achieve a slightly finer surface. It is a good product for pre-painting or mirror finishing preparation procedures.

 

Advantages：

High flexibility to optimum adaptation to contours

 

Steady high stock removal through the entire tool life and aggressive coated abrasive resin is freed up constantly

 

The design of opening spaces and flat bonded make the abrasive tools can process a face-down position, so can touch closely to the edges and corners.

 

Aluminium Oxide Ceramic Flap Wheel (CAO)Applications:

Leveling

 

Deburring

 

Surface work

 

Weld dressing

 

Structuring (matt finishing, brush matting, and satin finishing)

 

Fine grinding in multiple steps

 

Aluminium Oxide Ceramic Flap Wheel (CAO) of Applicable Industries

Applicable Industries:

■ Chemical processing industries

 

■ Building

 

■ Steelworks

 

■ Tool and mold processing

 

■ Pipeline

 

■ Shipping Building

 

■ Automotive industry

 

■ Aerospace, gas turbine treatment and repair

 

■ Machine engineering

 

Aluminium Oxide Ceramic Flap Wheel (CAO) of Applicable Industries

Application Purpose

Levelling

 

Deburring and Welding grinding

 

Structuring Surfaces

 

Step-by-step fine grinding

 

Aluminium Oxide Ceramic Flap Wheel (CAO) of Applicable Industries

Safety Warning Aluminium Oxide Ceramic Emery Flap Wheel (CAO)

 Instructions:

1. Please try to choose an operation indoors environment and wear protective guards and goggles.

 

2. Never to exceed the recommanded maximum permitted rotational speed for safety reasons.

 

3. In order to have a gppd syocl removal rate, quality of surface and thermal laoding on the workpiece, the best performace would with a recomended cutting speed at 15-20m/s.

 

4. Don't push and increase the pressure during the processing to achieve a finner surface looking, but try to switch to diffirent grit flap wheels.

 

Safety Warning:

1. The clamping lenght between shank and grinders should be more than 15mm.

 

2. Never exceed the maximum safe speed when the shank is extra long. Try to consult your sales to check the safety rotating speed before use.

 

If you want to know more kinds of ceramic alumina grinding wheel, please visit our website.

 

As a professional abrasive supplier, we have kinds of related products for sale, if you have needs, please contact us.