Stent ultrasonic coating system specially for drug eluted stent coating

 

Stent spray coating system with precisely control of deposition by ultrasonic nozzle technology

 

Without adhesion, pinholes and other defects on coating layer

 

Stent coating machine with excellent uniformity, stability and consistency

 

Stent spray coating system suitable for coronary artery, intracranial and sinus stents

 

High corrosion resistance, compatible with various organic solvents

 

Stent coating system is an ultrasonic spray coating system specially used for deposition of drug layers on stents. The stent spray coating system is equipped with Siansonic NanoMist ultrasonic nozzle or FocusMist ultrasonic nozzle to deposit drug coating onto the stent surface through ultrasonic atomization technology. It can precisely control the dosage of the coating, and the coating is uniform without adhesion, pinholes, orange peel and other defects. It can be used for depositing drug coating on coronary stents, peripheral stents, sinus stents, intracranial stents and other stents.

 

Siansonic NanoMist ultrasonic nozzle, which is mainly used for stent drug coating system, has smaller spray width and lower flow rate than other nozzle models. With regard to drug coating for coronary stents, intracranial stents, peripheral stents and other stents, drugs such as rapamycin which is usually dissolved in organic solvents to prepare a drug solution. The drug solution is atomized by ultrasonic nozzle into soft mist and it is uniformly sprayed onto the stent surface to form drug layer. The drug coating on the surface of the stent prepared by ultrasonic coating is uniform and dense, without defects such as adhesion, pinholes and bubbles. Siansonic stent drug coating system is equipped with a variety of stent holders, which can be used for rapid loading and unloading of stents. The stent drug coating system is also equipped with a drying device, which can dry the drug coating during the coating process to accelerate the coating process.

 

Furthermore, the specific stent ultrasonic coating laboratory in our site provide the process testing services for customers at any time, which can help customers to improve and establish process criteria. Our engineers and technicians in laboratory have plentiful experience in coating different types of stents.

 

Features of Siansonic ultrasonic stent coating system:

 

Stent drug coating system for drug eluted stents: integrated ultrasonic nozzle, ultrasonic generator, liquid delivery pump, stent holder, motion system, etc.

 

High uniform coating layer: drug coating without adhesion, pinholes, orange peel and other defects

 

Siansonic NanoMist or FocusMist ultrasonic nozzle: capable of extremely low flow rate, and the spray width is 1mm-10mm, suitable for various of stents

 

Precisely control of the dosage of drug coating on the stent

 

Applicable stent dimension: typically diameter < 12mm, length < 100mm

 

The transfer efficiency of material is 4-5 times higher than that of air spray coating

 

Unique stent holder design: fast loading and unloading stent

 

Wide range flow rate: 0.005ml/min - 2ml/min (depending on the solution and nozzle model)

 

Full digital ultrasonic controller: multi-core high-speed DSPs, multi closed-loop control, control accuracy of ultrasonic power is 0.01W.

 

Self-cleaning ultrasonic nozzle to prevent nozzle clogging

 

Extra air dryer can assist the drying of stent coating

 

The stent spray coating system is suitable for various typical solvents and polymers, such as acetone, tetrahydrofuran (THF), DMAC, chloroform, toluene, etc; Polymer: polyurethane, polycarbonate, silicone, styrene, etc

 

Exhaust system interface: built-in exhaust fan and ready for connecting to the exhaust system of the laboratory or clean room

 

Full color touch screen and friendly user interface