Molybdenum Disilicide High Temperature Electric Heating Element, Silicon Molybdenum Rod High Temperature Element

Description of MoSi2 Heating Element:

Molybdenum disilicide (MoSi2) is a silicon compound of molybdenum. Because the radii of the two atoms are not much different and the electronegativity is relatively close, it has properties similar to that of metals and ceramics. The melting point is as high as 2030 ℃, and it is conductive. Under high temperature, a silicon dioxide passivation layer can be formed on the surface to prevent further oxidation. Its appearance is gray metal color, originating from its four sides α- A-type crystal structure, hexagonal but unstable β- Modified crystal structure. Insoluble in most acids, but soluble in nitric acid and hydrofluoric acid.

MoSi2 Heating Element Parameters:

1.Physical Properties of MoSi2 Heating Element

2.Chemical Properties of Physical Properties of MoSi2 Heating Element

Oxygen-resistance under high temperature: in oxidizing atmosphere, a layer of compact quartz protective film is formed on the surface of element owing to the high temperature combustion, which prevent Mosi2 from oxidizing more. When the element temperature is higher than 1700 °C, the film becomes melting. It’s not suitable for long time use in the temperature range of 400-700°C, otherwise, the element will be powdering for the strong oxidation under low temperature.

3.Max temperatures of MoSi2 Heating Element in Different Atmospheres

MoSi2 Heating Element Advantage

1. High purity                                                     5. Long life

2. High temperature resistance                         6. Easy maintenance

3. Energy-saving                                               7. Easy installation

4. Chemical stability                                          8. Oxygen-resistance under high temperature

Marking diagram of molybdenum disilicide electric heating element

How to order MoSi2 Heating Element ?

Please tell us the following data of MoSi2 rod heating element
1.D1 = the diameter of hot zone
2.D2 = the diameter of cold zone
3.Le = the length of hot zone
4.Lu = the length of cold zone

5. A =Spacing

Please provide the specific size of D1 / D2 / Le / Lu / A, and product quantity, I will quote you.