Application

PWHTS-80 heat flow meter is suitable for IC characteristic analysis of various semiconductor chips, flash memory Flash/EMMC, PCB circuit board IC, optical communication (such as high and low temperature test of transceiver transmitter, high and low temperature test of SFP optical module, etc.), electronic industry, etc. High and low temperature cycle test, temperature shock test, failure analysis and other reliability tests.
 

Gas source requirements 

Inlet temperature: +15℃~+25℃
Inlet pressure: 90~110PSlG (6.2~7.6BAR)
Air intake flow: 1~1.5m3/min
Inlet dew point: ≤10℃
Oil content: ≤0.01PPM

SPECIFICATION

Temperature range: -80℃~+250℃
Temperature conversion speed: -55℃~+125℃/-125℃~-55℃≤10 seconds
Temperature accuracy: ±0.5℃
Temperature resolution: 0.01℃
Equipment gas flow: 4 ~ 18SCFM (1.9L / s ~ 8.5L / s)
Measurement mode: AIR MODE (air flu test) or DUT MODE (speed end measurement) Working mode: high temperature-normal temperature-low temperature / high temperature-low temperature / high temperature-normal temperature / low temperature-normal temperature / custom programming
Operation mode: manual/program/manual cycle/automatic cycle
Appearance size: width 660mm, depth 1050mm, height 1000mm
Machine weight: 150KG
Arm extension size: 140cm
The highest and lowest size: 720~1220mm
Temperature resistant glass cover size: inner diameter 140mm, height 55mm (can be customized according to product size)
Power supply: single-phase 220V, 50HZ, 40A