Precautions

The maximum allowable voltage of the sensor is 10% of the rated voltage.Please confirm that the supply voltage is less than the maximumallowable value before powering on.
The time from powering on to normal detection of the sensor is 100ms,please ensure that the sensor is used after 100ms of powering an.When using different power sources for the sensor and load, be sure toturn on the power of the sensor first.When the sensor is not used, it is recommended to cut off the power ofthe load first and then turn off the power of the sensor.When installing do not subject the sensor to severe external force (suchas hammering, etc.),which may damage the sensor performance.Avoid using thinner, alcohol or other organic solvents when cleaning.

Safety Warning

• Do not use in an environment with flammable,explosive or corrosive gases.
• Do not use in oil or chemical environments.
• Do not use in a high humidity environment.Do not use in direct sunlightDo not use in other environmental conditions that exceed the rated value.Do not disassemble, repair or modify this product without authorization.
   

Scrap Treatment
When the product is scrapped, please dispose of it as industrial waste.