It is suitable for tensile, compression, bending, shearing, peeling, tearing, two-point extension (additional extensometer is required) and other tests of materials and products in various textile, rubber, plastic, synthetic leather, adhesive tape, adhesive products, plastic film, composite materials, electronics, metal and other industries to determine the quality of products. This series of models is mainly applicable to the test of non-metallic and metallic materials with test load less than 5000N

Widely used in wire and cable, hardware, footwear, electronics, packaging and printing, medical equipment, auto parts, textile and leather, clothing and footwear, rubber and plastic products, colleges and universities; Research Institute; Commodity inspection and arbitration, technical supervision departments and other industries are the basic equipment for quality management and physical property testing

Technical parameters:

A. Maximum allowable load of the machine: 500Kg.

B. Load yuan: optional within 10, 50, 100, 200 and 500 Kg (Made in America)

C. Load measurement accuracy: load cell+HZ-2000 display ± 0.5% (5% - 100% of full scale)

D. Unit switching: Kg, Lb, N

E. Resolution: 1/50000

F. Displacement resolution: 0.001mm

G. Power system: AC motor, reducer (made in Italy)

Original configuration:

Tensile fixture 1 set

Extensible configuration:

The fixture or specially designed fixture and accessories can be selected according to the test standard or test sample provided by the customer, and the cost will be calculated separately.