Modular torque limiter, ejector pin torque limiter, manual reset torque limiter, high speed and high torque for the extruder industry: torque limiter

Product Introduction

Modular torque limiter, ejector pin torque limiter, manual reset torque limiter

·Built in precision ball mechanism, when the torque exceeds the set value, the drive side and load side are completely disengaged

·Response time: 3 milliseconds, safe and reliable mechanical overload protection device

·The central shaft hole is equipped with a keyway, and the side flange can be used to install components such as pulleys, sprockets, gears, etc

·The overload release torque is adjustable. Instantaneous output of electrical signals during overload, used for alarm or automatic shutdown

Extruders, twin screw extruders, and other types of extruders, due to their fast speed, high torque, and large inertia, can cause serious losses if they are not protected in a timely manner once overloaded. Due to the unique nature of this industry, module type limiters (or ejector pin type, tooth embedded type, safety coupling) are almost always used in extruders, The difference between this series and other series is that once overloaded, it can completely detach the active end and transmission end (other series will not completely detach), has no residual torque value, and will not automatically reset. It requires manual tapping of the limiter module with a hammer or other components to reset.

Our product line is tailored to each torque requirement, offering both simple and cost-effective solutions as well as tens of thousands of Nm modular series products capable of handling challenging, high torque, and heavy-duty applications.

Insufficient torque limitation can increase costly downtime - our torque limiters provide customers with assurance to meet their needs for precise torque limitation and increased uptime. The DIMEI-FM torque limiter has an accuracy of+/-5%. The torque limiter series incorporates a unique reverse reset design, using two sets of balls on the coaxial ruler pitch circle, which has a longer lifespan than the regular series and is suitable for high-speed applications.

Twin screw extruders require better torque overload protection devices. The DIMEI-FM series of products are specifically designed to protect the extruder from damage caused by unexpected peak instantaneous load impacts.

Related products: torque limiters, brakes, torque limiters for twin screws, extruders