PRODUCT DESCRIPTION:

Max Performance Enhancer with Compressor Anti-Wear;

Creates film that seeks out and adheres to metal surfaces;

Patented formulation with advanced chemicals developed for NASA USA;

Eliminates moisture and neutralize acid from the system; Reduce cabin humidity and drier air improve comfort in car;

Advanced seal rejuvenating ingredient to cure the hardened o-rings and prevent leaking;

Special polarized & modified power molecules clean and protect the system; free from oil sludge, moisture and acid formation to extend service life of the whole A/C system.

PRODUCT BENEFITS:

Revitalizes A/C cooling capacity, colder fast.

Stops leaks and conditions seals.

Extends A/C life.

No Tools Required, charging easy and fast. 

DIRECTIONS FOR USE:

1.Find A/C low-side port and remove cap. It is usually on a larger diameter metal tube that runs between the evaporator (dashboard side of engine) and compressor (on engine).

2.Start engine, turn A/C on MAX Cool with vents on high.

3.Shake the can well.

4.Hold can upside down and push Direct Charge connector onto low-side port for 30 seconds or until the can is empty.

5.Replace cap on low-side port.