PRODUCT DESCRIPTION:

Replaces lost refrigerant in R-134a A/C system. Meets AHRI 700 / SAE J2276、 GB / T 36765 2018 High Purity Standards , Low moisture and acid extend service life of the whole A/C system. Compatible with POE、PAG or PAO compressor oil. ALL of IDQ products with standard Aerosol Specification High Pressure 2Q Steel Cans absolutely safe for user. supervised by DOT and add high value selling point to high class refrigerant . No one can copy it. Contains anti-wear additives and lubricant to help restore viscosity, for high mileage and older vehicles.

PRODUCT BENEFITS:

Stops refrigerant leaks on rubber hoses, gaskets, seals and all types of O-ring.

Red leak detection dye , No UV light necessary to view the Dye.

Compatible with PAG, POE oils.

Will not harm vehicle A/C system or refrigerant recovery or charging equipment.

DIRECTIONS FOR USE:

1.½"ACME THREADED TOPFind A/C low-side port and remove cap. It is usually on a larger diameter metal tube that runs between the evaporator (dashboard side of engine) and compressor (on engine).

2.Start engine, turn A/C on MAX Cool with vents on high.

3.Shake the can well.

4.Hold can upside down and push Direct Charge connector onto low-side port for 30 seconds or until the can is empty.

5.Replace cap on low-side port.