MOV stands for Metal Oxide Disc Varistor  . It is a type of surge arrester that is used to protect electrical systems and equipment from overvoltage transients. It consists of a metal oxide material that acts as a voltage-dependent resistor, which limits the voltage across the device. 

Types of MOV for Line Surge Arrester

D48 Series MOV Block for Line Surge Arrester

D60 Series MOV Block for Line Surge Arrester

D70 Series MOV Block for Line Surge Arrester

D78 Series MOV Block for Line Surge Arrester

Design Considerations for MOV Block Line Surge Arresters

Voltage Rating: Ensure that the MOV line surge arrester you choose has a voltage rating that is equal to or greater than the system voltage.

Current Rating: Choose an MOV line surge arrester with a current rating that meets or exceeds the peak current that the system can generate.

Response Time: Select an MOV line surge arrester with a response time that meets the requirements of the application.

Operating Temperature Range: Ensure that the MOV line surge arrester you choose has an operating temperature range that meets the requirements of the application.

Environmental Conditions: Consider the environmental conditions in which the MOV line surge arrester will be operating, including the possibility of exposure to moisture, dust, or other contaminants, and select an MOV line surge arrester accordingly.

Installation: Consider the ease of installation when selecting an MOV line surge arrester. Select an arrester that requires minimal wiring, allows for easy mounting, and can be easily tested and maintained. 

TGE MOV

Testing and Maintenance of MOV Block Line Surge Arresters

Testing and maintenance of MOV line surge arresters is essential in order to ensure they remain effective in protecting against power surges. Testing of the MOV line surge arrester should be done periodically to check for proper operation. This includes visual inspections of the arrester and its components, as well as testing with a surge testing device. Maintenance of the arrester should include regular cleaning of the arrester to remove dirt and debris, as well as replacing any components that are worn or damaged. Additionally, the MOV line surge arrester should be checked periodically to ensure it is properly grounded and that the wiring is secure.

If you want to know more about metal oxide varistor failure, please visit our website.