30kw Inverter Power Solar Energy Storage 118kwh Battery System

Model:	Scopio-30kw-118
Brand:	Zonergy
Origin:	Made In China
Category:	Metallurgy , Mining & Energy / New Energy / Solar Energy
Label:	solar home system , solar energy system , solar battery system
Price:	US $42067.23 / pc
Min. Order:	1 pc

Inquire Now

Product Description

Off On Grid Energy Storage Systems

The off on grid PV power generation system is widely used in places where there are frequent power outages, or where the PV self-generated power cannot be put online, where the price of self-consumption power is much more expensive than the price of grid-connected power, and where the price of peak power is much more expensive than the price of trough power.

The system consists of photovoltaic modules, solar grid-connected integrated machine, battery, load, etc. The photovoltaic array converts solar energy into electricity when there is light, and supplies power to the load through the solar control inverter and charges the battery at the same time; when there is no light, the battery supplies power to the solar control inverter and then supplies power to the AC load. Compared with grid-connected power generation system, this system has added charge/discharge controller and battery, so that the PV system can continue to work when the power grid is out, and the inverter can switch to off-grid working mode to supply power to the load.

Features:

●Separate cabinet design, divided into electric control cabinet and battery cabinet, convenient for transportation

●One electric control cabinet supports 1~3 battery cabinet access, which is convenient for the configuration of different backup points.

●Outdoor design, meet IP55 protection level

●Each battery cabinet has independent fire-fighting system and air-conditioning system, high safety

●With isolation transformer output, safe and reliable

Scopio 30KB-T1~Scopio 50KB-T1
Technical parameters:	Scopio30KB-T1	Scopio50KB-T1
Inverter scalability of electric control cabinet
Power scalability	30kW /60kW /90kW	50kW /100kW/150kW
Energy scalability	118 kWh~1062kWh(118*n，n=1~9)
Number of product assortment	>20
Basic parameters of the inverter
Weight of a single unit	440 kg	720 kg
Dimension of a single unit (mm)	8008001900
Inverter photovoltaic input parameters
Maximum photovoltaic power	60/120 kw
Start-up voltage	150 V
Maximum photovoltaic voltage	1000V
Voltage range	150V-1000V
MPPT voltage range / rated voltage	200V-850V
Number of MPPT input circuits	1/2
AC output parameters (grid)
Rated apparent power	33 kVA	55 kVA
Rated active power	30 kw	50 kw
Maximum output current	43A	72A
Nominal AC output voltage	400 V/320 V~460V
Nominal grid frequency	45-55/55-65Hz
Power Factor at rated power	1
Power Factor	0.8leading...0.8lagging
THDi	＜3%
AC system	3W+N+PE
lsolation transformer	available
AC output parameters (off-grid)
Maximum apparent	33 kVA	55 kVA
Rated active power	30 kw	50 kw
Rated output frequency	50/60 Hz
Automatic switching time	＜0.5 S
THDU	≤2% linear
Rated frequency	50/60 Hz
Overload capacity	110%-10 minutes,120% - 1 minute
Parameters of a single battery cube
Model	ZSXH-BX-132280
Assortment scheme	1P 132S
Total voltage/capacity of a single battery cabinet	422 V/280 Ah
Voltage range	382.8 V-475.2V
Nominal energy of a single battery cabinet	118 kWh
Weight of a single battery cabinet	1550 kg
Dimension of single battery cabinet (mm)	247010701700
Battery cabinet assortment mode	parallel connection
Battery type	lithium ion battery
System parameter
Degree of protection	IP55
Number of cycles	＞6000 times
Calendar life	10 years
Certification	IEC61683CE(EC62109),IEC62116,IEC61727,IEC62619,UN38.3,GB/T 36276-2018
Working temperature	charging 3 ~ 55 C; discharging - 20 ~55C
Altitude for product operation	5000m (Sstem capacity reduction occurs when the altitude for product application rises above 3000 meters.)
Note: Technical parameters listed hereunder are for reference only. Actual parameters shall be subject to products shipped.

Connected/off-grid photovoltaic power plants in remote areas

To solve power consumption in remote areas, the energy storage cabinet is the core to build a parallel/off-grid photovoltaic power station. The power station is independent or complementary to the grid to supply power to the load. Provide a modular distributed standard solution for this model, reduce the difficulty of power station construction, and realize the configuration capacity stepping and support the expansion of cabinets according to the demand capacity of the power station.