This equipment is mainly used for cutting foam models in the white area in the field of lost foam casting. The height of the resistance wire can be changed by shaking the handles on both sides, and the foam can be sliced and squared. More styles of model cutting can be carried out through self-made tooling. Flexible, simple to operate, easy to use, and convenient to maintain, it is an indispensable cutting equipment for the white area of the lost foam.

 Product structure

The manual foam cutting table is mainly composed of the main body of the table, the longitudinal movement combination, the cross bar, the voltage regulator and the cutting auxiliary materials (resistance wire, spring, fish mouth clip), etc.

Product performance and characteristics

1. This equipment is an indispensable cutting equipment for the white mold workshop in the field of lost foam. It has the characteristics of flexible application, simple operation and low labor requirements.

2. The cutting machine with auxiliary tooling can complete the cutting of various shapes, such as cuboid, cylinder, cone, sphere, etc.

3, easy maintenance, equipment longitudinal trapezoidal thread screw nut engaging the lift, both ends bearing drive, only need to add butter periodically to ensure ease of operation of the device.

Contact us