| Laser Source |
Fiber laser Raycus/MAX/JPT |
| Laser Power |
20W/30W/50W/60W /100W |
| Wave length of laser |
1064nm |
| Marking scope |
110*110mm/150*150mm/200*200mm/300*300mm |
| Laser Head |
High speed sino galvo scanning head |
| The minimum focus facula diameter |
20μm |
| Minimal character |
0.01mm |
| Positioning |
Double red dot |
| Vertical shaft lifting height |
550mm/700mm |
| Control system |
Original EzCad controller with USB port( 3 axis) |
| Marking depth |
0.01-5mm( depends on different materials) |
| Marking line width |
0.01-0.1mm |
| Marking speed |
≤8000mm/s |
| Laser repetition frequency |
20kHz~80kHz |
| Galvanometer |
High speed digital galvanometer （SINO-GALVO, SG2206) |
| Filed lens |
Scanning lens( Wavelength brand, F-THETA) |
| Cooling method |
Air Cooling |
| Power supply |
AC 220V/110V, 50/60Hz, single phase |
| Support format |
PLT, BMP, DXF, JPG, TIF, AI etc |
| Process Material |
All kinds of metal and part of non-metal materials( opque acrylic/plastic) |
| Certificate |
CE/FDA |
| |
|
| |
|
| Laser Source |
Raycus/MAX/JPT |
| Laser Power |
20W/30W/50W/60W /100W |
| Laser Wavelength |
1064nm |
| |
|
| Technical Parameters |
|
| Laser Source |
Raycus/MAX/JPT |
| Laser Power |
20W/30W/50W/60W /100W |
| Laser Wavelength |
1064nm |
| Beam Quality |
M2<1.5 |
| Laser Repetition Frequency |
30-60KHz |
| Marking Area |
110*110mm/150*150mm/200*200mm/300*300mm |
| Marking Speed |
≤8000mm/s |
| Engraving Depth |
0.01mm-2mm(It depends on the material) |
| Minimum Line Width |
0.01mm |
| Minimum Character |
0.2mm |
| Repeat Accuracy |
±0.001mm |
| Working Voltage |
220V/50HZ |
| Power Consumption |
≤700W |
