1)Chemical and corporate identification

Chinese names of chemicals

1-2-amido/succinimide

Product  name

1200A

Product recommendation and restricted use

As an anti-rust agent used in lubricating oil, grease

Manufacturer's name

Hebei Tuofu Engry Technology Co, Ltd.

Address

Tongda Road Industrial Park, Jinzhou City, Hebei Province

Zip code

052260

Enterprise emergency telephone

0311-84317827

Fax NO.

0311-85123667

E-mail address

jasmine@hbtuofu.com

Effective date

2023-03-15

2)  Risk codes

GHS risk categorise

Harmless

GHS label element

Sysbol

No coincidence

Risk Phrases

No risk phrases

Hazard statement

Physical hazards:

It is not classified as a hazardous substance according to GHS standards.

Health hazards:

It is not classified as a health hazard according to GHS standards.

Environmental hazard:

It is not classified as a health hazard according to GHS standards.

GHS instructions for preventive measures

Preventive measures

Free speech

incident response

Free speech

Safe storage

Free speech

Waste disposal

Free speech

Other hazards that do not affect classification

It's not rated as combustible, but it burns

Summary of main symptoms and emergency response

Based on animal tests, no strong evidence has been found that the product causes cancer. Under normal circumstances, this product is not harmful to health, and excessive contact may cause irritation to the eyes, skin, breathing, etc.

3)  Composition / composition information

Name of chemical substance

cas number or identification number

EC serial number

Content，wt%

1-2-amido/succinimide

123-56-8

--

70-75

White mineral oil

8042-47-5

--

25-30

4) Frist aid measures

General information

Use under normal conditions should not be a health hazard.

Disposal of different contact  modes

Suction

No medical emergency is required. Consult a doctor if you have symptoms such as cough or dyspnea

Skin contact

No medical emergency is required. Remove the contaminated clothes, wipe the contaminated parts clean, and wash with soap and water. Wash clothes and shoes thoroughly before reuse. Seek medical attention if necessary.

Eye con

No medical emergency is required. Rinse with water for 15-20 minutes. Seek medical attention if necessary.

Ingestion

Unless you have swallowed a large amount, there is usually no need for a medical emergency. Medical attention is recommended as a precaution.

Main symptoms(acute/late effects)

No have

A special note to doctor

No special first aid is required in the workplace, symptomatic treatment.

Advice for protecting the rescuer

Action should not be attempted without proper protective equipment.

5) Fire control measures

Particular risk

This product has no explosion hazard and is not dangerous goods. In case of high heat, open flame and strong oxidant, easy to cause combustion.

Fire extinguishing

Methods and

extinguishing agents

Sprinkler or spray, foam extinguisher, carbon dioxide extinguisher, dry powder extinguisher. Sand is suitable for small fires only.

Harmful substance sproduced during combustion

May release toxic fumes.

Prohibited fire extinguishing agent

Do not spray

Special protective equipment for fire personnel

Breathing apparatus must be worn when approaching the point of ignition in a confined space.

6) Emergency treatment of leakage

Avoid contact with spilled or released substances. For guidance on the selection of personalprotectiveequipment, see Chapter 8 of the Safety Technical specification.

For handling information, see Chapter 13 of the Safety Technical specification. Please comply with all applicable local or national regulations.

Emergency procedure

Cut off the fire source, immediately contact the operator, let unrelated personnel quickly evacuate to a safe area and isolation. Cut off the source of leakage as much as possible to prevent it from entering the sewers, drains, water bodies and other Spaces. Follow relevant fire procedures, refer to Chapter 8 of the Safety Technical manual

Protective measures for operators

Avoid contact with skin and eyes

Environmental protection measures

Before arriving at the site, the operator should try to limit the spilled material. For a small amount of leakage, use wood chips, sand, soil or other adsorbents to collect the spill and place it in a closed, leak-proof container for treatment; For large spills, build embankments or dig pits to collect them and ensure that they do not enter sewers, rivers, water sources and lowlands.Dispose of spills in appropriate containers. If there is pollution to soil and plants, report to the relevant authorities.

The disposal of waste is referred to Chapter 13 of the safety technical specification.

Elimination method

A large amount of leakage is pumped into the container with a vacuum pump, and a small amount of leakage can be prevented by wood chips, sand, soil, oil absorbing cotton or other adsorbents and put into a sealed container for treatment. Land leakage, take protective measures to cut off the source of pollution, to minimize the pollution of surface water. Water spills, immediately stop the loss of oil with oil lines, warn nearby vessels, and use appropriate dispersants if necessary. Serious spills that cannot be addressed should be reported to local authorities.

7) Operation, disposal and storage

Operation disposal

General precautions

Avoid prolonged or repetitive contact with the skin and wash thoroughly after contact. If there is a risk of inhaling steam, spray or smoke, use a local exhaust ventilator. When handling, light loading and unloading should be done to prevent damage to packaging and containers.

Precautions for safe disposal

Operators must be specially trained and strictly abide by the operating rules. Avoid contact with oxidants. Equipped with the corresponding number of fire equipment and leakage emergency treatment equipment. Protective shoes should be worn when loading and unloading 200-litre barrels of products. Empty containers may have harmful residues.

Storage condition

Keep containers sealed and do not store in open or unlabeled containers. Storage conditions should be cool, dry, ventilated, away from strong oxidants, tinder, heat sources and flammable materials. Store at room temperature. Empty containers may still have some products, do not cut, welding, do not expose to high temperature, flame.

8)  Contact control and personal protection

Allowable concentration

No further information is available.

Engineering control method

Provide exhaust ventilation or other engineering controls to ensure adequate ventilation.

Personal protective equipment

Personal protective equipment shall comply with relevant national standards. For details, consult your personal protective equipment supplier.

Respiratory system Protection

Respiratory protection is not required under normal conditions of use. When ventilation is insufficient, choose a respiratory protection device that meets the requirements of relevant regulations. For details, consult the supplier of respiratory protection equipment.

Hand guard

Use oil - and chemical-resistant protective gloves. Nitrile rubber, neoprene rubber, and PVC gloves are recommended. Replace contaminated gloves promptly. Wash thoroughly with soap and water after operation.

Eye guard

If splashing is possible, use safety glasses.

Skin and body protection

Under normal conditions of use, no special skin and body protective equipment is required in addition to ordinary work clothes. When there is the possibility of spatter, please choose suitable and permeable safety clothing and safety shoes according to the actual situation of the workplace, the recommended material is nitrile rubber.

9) Physical and chemical characteristics

Appearance

Brown red clear viscous liquid

Smell

Odeur ammonicale

PH

Alkalescence

Melting point

Not applicable

Freezing point

Non-available

Boiling piont

＞300℃

Flash point

190℃(Open cup) (typical value)

Flammability (solid, gas)

Non-available

Explosion limits

Non -available

vapour pressure

Non -available

vapor density

Non -available

Density

0.85 g/cm3（20℃）

solubleness

Non -available

Octanol/water partition coefficient

Non -available

Autoignition temperature

Non -available

Decomposition temperature

Non -available

Radioactivity

Deny

10) Stability and reactivity

stability

stability

reactiveness

This product is not reactive under normal conditions of use, storage and transportation

Dangerous reaction

There are no known hazardous reactions under normal conditions of use

Condition to be avoided

Extreme temperatures, sun exposure, exposure to strong oxidants, ignition sources

Ban the match

strong oxidant

Hazardous decomposition product

No dangerous decomposition forms under normal storage conditions

11) Toxicology information

acute toxicity

In acute oral toxicity test (one maximum test), the LD50 of both female and male rats was greater than 5000mg/kg, which was relatively non-toxic. In acute percutaneous toxicity test (one maximum test), the LD50 of both female and male rats was greater than 2000mg/kg, indicating that the rats were actually non-toxic.

Skin irritation or corrosion

Expect to feel mild irritation. Prolonged or continuous contact with the skin without washing may cause skin irritation.

Eye irritation or corrosion

Expect to feel mild irritation.

Inhalation hazard

Inhaling steam or oil mist may cause mild irritation.

Respiratory or skin allergies

It is not expected to be a skin sensitizing substance

Germ cell mutation

There is no risk of mutagenesis

carcinogenicty

Not considered carcinogenic

Reproduction toxicity

No expected harm

Specific target organ system toxicity - one time exposure

No expected harm

Specific target organ system toxicity - repeated exposure

No expected harm

extraneous information

According to laboratory studies using the same or similar materials, under normal use conditions, it is not considered to cause major health effects. It does not induce mutation in the organism or is not toxic to inherited genes. No sensitization in animal or human tests.

12) Ecological information

Ecotoxicity 

This product is not considered harmful to aquatic organisms and is not harmful to the environment in the long term.

Durability and degradability

It is not expected to biodegrade easily

Potential bioaccumulation

No further information is available.

Migration in soils

If it enters the soil, it will be absorbed by soil particles and cannot flow.

13) Waste disposal

Residual waste

Where possible, it should be recovered or recycled, or centrally disposed of by a waste collector approved by relevant legislation.

Disposal of containers

Disposal should, as far as possible, be carried out by waste collectors who are approved by the relevant regulations.

Disposal considerations

Please use personal protective equipment. Keep waste from contacting soil or flowing into drains. Use transport, recycling, treatment or storage equipment approved by the authorities for waste turnover or storage.

14) Transportation information

This product is not classified as a hazardous substance during land, sea and air transport

UN dangerous goods number

Not applicable

UN shipping name

Not applicable

UN classification of dangerousness

Not applicable

Packaging group

Not applicable

Marine pollutant

Not applicable

15) Regulatory  information

According to the relevant laws and regulations of China, this product is not classified as a dangerous chemical.

Domestic chemical safety management regulations

Regulations on the Safety Administration of Hazardous Chemicals (Promulgated by The State Council on December 7, 2013)

Regulations on the Safe Use of Chemicals in the Workplace ([1996] Ministry of Labor No. 423)

List of Existing Chemical Substances in China

Catalogue of Hazardous Chemicals (2015 Edition)

GB/T 16483-2008 Chemical safety technical specification content and project sequence

GB 13690-2009 General Rules for classification and Risk publicity of chemicals

GB 15258-2009 Regulations for the preparation of chemical safety labels

Hazardous factors in the workplace - Occupational exposure limits - Part 1: Chemical hazardous factors

16) Other data or data

revision date

March 15, 2023

MSDSversion number

A3-2

other material

Additional information and manuals are available through sales and technical services

Revision declaration

The information in this MSDS applies only to the specified product and does not apply to mixtures of this product with other substances unless otherwise specified. This MSDS is intended f or use by appropriately trained users of the product. The user of this MSDS must make an independent judgment as to the suitability of this MSDS under special conditions of use. In the case of special use, the author of this MSDS shall not be liable for any injury caused by the use of this MSDS.