Features:

1 An electronic controller IC integrated multifunction procedures to ensure that the machine to roll stamping ,  round surface, such as a multi-purpose pressure round running.

2 Gilding press elbow mechanism design, less compressed air consumption, strong steady pressure.

3 Stamping pressure, temperature, hot pressing time is adjustable.

4 Work table can be customized to move back and forth automatically, it is easy tofacilitate safe and fast operation.

5 Work table can swing around a center of rotation of the workpiece for rolling without slipping.

6 automatic document feeder, collection, and adjustable. Taiwan OUTAI motor, and it can be customized for Two-speed motor and high precision positioning

7 Equipped with photocell (Taiwan FOTEK electric eye, 250 times per second high-precision motion), which try to locate the point of thermal transfer paper with precise tracking control.

8 The height of lettering head is adjustable, stamping 300MM larger workpieces. Germany BOSCH can be customized cylinder (super seal wear).Using Taiwan Mindman precise control solenoid valve, German NASS coil stable and durable.

9 The work table level shuttle is using the wind to push oil conversion device, the working mechanism drives the workpiece rotate smoothly stamping, stamping stable quality.

10 The machine can be customized according to customer requirements horizontal, hydraulic, grinding cross table, two-speed winders, table plus rodless cylinder automatic access, roll-to-roll hot stamping, stamping irregular shaped product development and so on.

11 Equipped with emergency stop safety devices to protect the safety of the operator.

Product parameters:

1.Plane Max Printing:250*300mm

2.Cylinder Max Printing:￠300mm

3. Length of Rubber Roller: 150mm

4. Working table area: 600 x 200 mm

5.Max pressure:1300 Kg

6.Up-and down distance: 320 mm

7.Table Stroke : 300 mm

8.Heat wattage: 1600 W

9.Foil feed: Motor Drive

10.Temperature range:0 - 400oC

11.Net Weight :350 Kg

12. Outer dimension:1100 x 850 x 1700 mm .

13. Max Oil Pressure: 70kgf/cm2'

14.Wattage:220V 50Hz

15.Air Pressure:0.5-0.7MPa

16.Stamping speed:1000P/hour