This specification shall cover the characteristics of the ceramic resonator with the type SMD 4Mhz ceramic resonator
Construction: SMD ceramic packaging.

The products conform to the RoHS directive and national environment protection

law
 

Components shall be left in a chamber of +85±2ºC for 1000 hours, then measured after leaving

in natural condition for 1 hours.

Test Conditions

Parts shall be tested under the condition ( Temp.:20±15ºC,Humidity :65±20%

R.H.) unless the standard condition(Temp.:25±3ºC,Humidity :65±10% R.H.)

is regulated to measure

Caution

Don't apply excess mechanical stress to the component and terminals at

soldering. Do not use this product with bend.

Do not clean or wash the component for it is not hermetically sealed.

Do not use strong acidity flux,more than 0.2wt% chlorine content,in flow

soldering.

Don't be close to fire.

This specification mentions the quality of the component as a single unit.

Please insure the component is thoroughly evaluated in your application circuit

Expire date (Shelf life) of the products is 12 months after delivery under the

conditions of a sealed and an unopened package. Please use the products within 12

months after delivery. If you store the products for a long time (more than 12 months),

use carefully because the products may be degraded in the solderability or rusty.

Please confirm solderability and characteristics for the products regularly.

For more information please visit our website:

https://www.xtalong.com/channel-165.html