General Instruction
CWA series magnetic blow-out micro switch is one of the auxiliary components
for the high-voltage set of equipments. It is applied for signal collections of
route, swing angle, limit position in various motive mechanisms. Meanwhile, the
CWA could be assembled to auxiliary switch in high voltage mechanism, so as
to control switch on & off and interlock of signals.
Service Condition
1.Ambient temperature:-40℃～+70℃.
2.Altitude:the installation spot is supposed not to exceed 5000m.
3.Humidity:the average value of relative humidity is max 95%, the average
value of vapor pressure is max 2.2kPa in condition within 24 hours.the monthly
average value of relative humidity is max 90%, the monthly average value of
vapor pressure is max 1.8kPa.
4.Vibration acceleration is max 15m/s².
5.There should be no evident air pollutions from dust, smoke, corrosives and
combustible gas, vapor or salty fog.
Features of Structure
CWA series magnetic blow-out micro switch is assembled by plate case with
internal components. The moving and stable contacts and connectors are all
made of copper with silver plating. The insulated case is made of superior
inflaming retarding material with high strength, good insulation property and
heat-resistance, and the structure of the insulation plate ensures excellent dustproof
effects. It could be plug in from upwards or downwards for connection,
NO and NC and poles are distinguished by colors for customers` convenient