Our plug and play system 

Conventional lighting requires separate power and a wired connection to every lamp, needing the expertise of electricians. This becomes labour-intensive and costly when running many meters of lighting. The BRANDO LED Strip Lighting plugs  into an existing power source using a power supply which then connects to one end of the LED strip. A single power supply will light a 20 meter LED segment. To extend beyond 20 meters, just add another power supply at the other end and connect the next section of LED strip – it's that simple.

Maintenance-free. Easy to repair.

Damage to lighting through routine underground activities happens. When a conventional lamp is damaged, it results in loss of illumination over many meters – making the affected area a safety hazard until repaired by a qualified electrician. Should a section of the BRANDO strip light be damaged, only this section loses light. The remaining portion of the strip continues to provide illumination – allowing for a safer environment. Additionally, damaged sections can be replaced in 8" strips – making it a quick and cost-effective fix.

• Intelligent temperature management, sensors monitor LED temperature and if safe parameters are exceeded the affected      LED’s are automatically dimmed until safe temperatures are restored.

• Intelligent voltage surge management, restorable resistors limit overcurrent and overvoltage situations.

• AC to DC convertors, miniature voltage convertors.

• Short circuit protection, in the case of short circuit the power is isolated until the circuit is normalized.

Dimension: 10000mm(length) *36mm(width) *12mm(thickness)