Main component and technical parameters

● The detection limit of harmful elements Cd, Pd, Cr, Hg and Br is restricted according to ROHS instruction
Detection limit (Cd, Pd, Cr, Hg, Br): 1ppm

● Si(PIN) or SDD detector 

The resolution of detector is one of the main indexes to evaluate the performance of energy dispersion XRF spectrometer.

1. Resolution< 145eV (The lower the resolution, the higher the sensitivity.)

2. Counting rate >1000/S    

3. Crystal area > 15m㎡

4. Beryllium window thickness = 0.025mm

5. Detector power< 1.2W

● Multi-channel analyzer Number of channels: 2048 channels

● Power controller 

System power control: +5 VDC at 250 mA(1.2 W)

Constant cooling control: 400 VDC

● X ray tube 

The X-ray tube, specially treated with embedded lead inside is shielded in full range, leaving only the side window for the x ray outlet. The canned insulating oil is used for high voltage insulation and cooling.

1. 0.005 inch thickness of Beryllium window

2. Rated consumption power 50W

3. Rated power 50kV. Designed service life >15000h.

● High voltage generator 

1. Input: 85 ~ 265VAC, 47 ~ 63Hz,

2. Power factor correction.1kV ～ 5kV comply to UL85 ~250VAC

3. Voltage variation: 0.01% of output voltage from no load to full load

4. Current variation: 0 ~rated power, 0.01% of output

5. current Ripple: Peak - peak of output voltage 0.25%

6. Temperature variation:voltage or current setting, 0.01%/℃

Stability: 0.05%/8h after warming-up for half an hour