inline ICT+FCT automated testing

inline ICT+FCT automated testing
Model:T828
Brand:MSTK
Origin:Made In China
Category:Industrial Supplies / Electrical & Electronic Product Equipment
Label:inline ICT , inline FCT testing , ICT automation testi
Price: ¥1 / pc
Min. Order:1 pc

Product Description

Nowadays, in China and around the world, labor costs are rising, raw materials are constantly rising, and quality requirements are becoming higher. Industrial automation is an inevitable way out. T828F online ICT+FCT is particularly suitable for the final stage of SMT fully automated production lines, detecting and certifying the performance targets of electronic products, automatically screening excellent and inferior products, waiting for repair products, and high-tech electronic products require the use of faster equipment with higher high-tech content.

 

The automatic online ICT+FCT testing system can be used to automatically test the PCBA after the furnace of the automatic circuit board assembly production line (wave soldering/reflow soldering), or it can be separately connected to the upper board machine, connecting table, NG/OK automatic screening machine, and lower board machine to form the automatic testing production line body

 

Product features:

 

Including a fully automatic static ICT test and a fully automatic dynamic FCT function test, which can reduce more manpower when used in conjunction

Integrated automatic board entry, testing, and splitting. The advantages of saving space and modularization (flexible combination)

Single track (double track), NG products are automatically stacked for easy maintenance, and can handle situations where the tested board is less than 1KG

The friendly software provides better test editing and detailed reports.

Independent research and development, design and production, capable of cooperating with any MES system

Patented mechanical positioning system effectively prevents crushing of the test plate

With barcode scanning function, it records test data for easy traceability

Specification parameters:

 

A: Equipment parameters:

Equipment budget size: 1250mm in length, 780mm in width, and 1650mm in height (including signal tower lights, 1800mm).

Measurable PCB board size: width 350-450mm, length not exceeding 450mm, and part height not exceeding 65mm (upper) and 8mm (lower). The PCB board must have at least 6mm board edges on one side (no parts, no test points).

PCB has at least 3 reasonable positioning holes (if there are no positioning holes, they must be positioned against the board edge according to the actual situation).

PCB cannot have flexible wires with a length exceeding 20mm (depending on the situation).

The flow track consists of three belt tracks, namely the buffer waiting station (scanning station), the testing station, and the NG splitting station. When defective products appear on the testing station, they can be placed in a designated area (separated from the track by a specific belt, stacked 4-5 pieces).

Manual adjustment of track width.

The height of the transmission track from the ground is 900mm ± 30mm

The belt speed is adjustable, with a maximum speed of 4-8's/m.

Shell color: gray white

Transmission direction: from left to right.

1024 test points can be expanded to 2048 test points

Different PCBs must be manually replaced with corresponding fixtures.

Each test (board entry) requires one PCB.

• Equipped with a ribbon printer (printing defective items)

The cylinder stroke is greater than 150mm, and the reserved space at the bottom of the board is more than 20mm (to prevent interference with PCB board bottom components)

• Reserve interfaces and hardware locations with MES (scanning guns and displays)

B: Input power supply: AC 220V, 50-60Hz

C: Total power: approximately 500W

D: Pneumatic system pressure: 0.4~0.6Mpa

E: Beat: 3 seconds per piece (straight through state). The testing speed and time depend on actual needs.

F: System positioning accuracy:

Benchmark three-point mechanical positioning: 0.25 ± 0.05mm (track positioning), fixture positioning 0.05 ± 0.05mm (final positioning).

G: Electronic control part:

An automatic system composed of sensors and motors controlled by PLC

 

http://www.mstktest.cn/79.html

 

inline ICT+FCT automated testing 1inline ICT+FCT automated testing 2

Member Information

MSTK technology
Country/Region:Guang Dong - China
Business Nature:Trading Company
Phone:13302910083
Contact:MR CAI (MANAGER)
Last Online:27 Jun, 2024