APPLICATION

●QP、CQP Series pneumatic disc brakes are widely used for speed reducing, stopping/braking of the low or medium torque driving mechanism. The brakes can also be applied as tension brake on winding machines, such as: paper-web tension control, news paper publishing tension control, steel unwind control, wire and cable reel unwind tension etc.

MAIN FEATURE

●QP is normally closed design- spring braking; released by pneumatic; CQP is normally open design pneumatic braking,released by spring, Brake force can be adjusted by required air pressure,

●Compact structure and small size, light. It is easy to control and operate.

●The linings are of inserting insallation style and non-asbestos. It Is easy to be replaced.

●Installation;' the brake is either horizontally mounted or verially mounted. While it is used at horizontal shaft, the brake can be positioned within any angel around the disc, but ideally they should be mounted horizontally (in 3 or 9o'clock position); while it is applied at vertical shaft, no angle Is required. Per disc can be fitted either one brake or two and more.

When two or more brakes are applied, symmetrially Installation is recommended.

●It needn't sot all power source separately, will be connected with air compressor station, and the braking time can be stepless adjustment with speed control valve in the gas line.

OPERATING CONDITION

●Ambient temperature: -25℃- + 40℃

●Operation air pressure(Max.): 7 bar

●Air requirement: dry and filtered compressed air, excluded corrosion gas.

●Special requirements can be discussed before production.