Product Description
This instrument is a square base, mainly used for CNC engraving and milling machine tool measurement, wear, damage detection; Alarm signals will be generated when exceeding the trip, which can prevent damage accidents. It is suitable for China, Japan, Taiwan, Korea, Germany and other machining centers engraving machines and various CNC control machines.
Product Parameters
| Product name |
Precision automatic tool set |
| Model |
T24E-20 |
| Signal output |
//Normally open/normally dosed |
| Diameter of cutter face |
O20mm |
| Material of knife face |
/Tungsten steel |
| Surface processing method |
4S /Grind the 4S mirror |
| Repeatability |
0.001 mm (:50-200mm/min/Condition: Operating speed 50-200mm/min) |
| Contact life |
300/3 million times |
| Efforts to contact |
2.5N (:/Installation status: Vertical) |
| Pretravel |
/Nothing |
| Stroke |
12mm |
| Contact rating |
DC 24-20mA (MAX)/Recommended value 10mA /Resistive load |
| Cable specification |
5m ()604830N, R7/Standard 5M (can be customized) 6 type 048 tensile strength 30N, minimum bending radius R7 |
| Cable shield |
1 _5m ()R25/Standard 1 _5m (customizable) minimum bending radius R25 |
| LED /LED Light |
Open when working normally closed |
| Waterproof Rate |
IP68*100%,/IP68*100% waterproof, oil proof sealing performance |
| Net weight |
641 g |
| Gross weight |
721 g |
| Overrange alarm signal |
:NC/(/) |
| |
Output mode: NC/ normally closed (emergency stop when the signal is disconnected/can be ordered normally open) |
| |
:DC24V/20mA(.) |
| |
Contact voltage: DC 24V/20mA resistance load (load and current limit should be added in special cases) |
