Characteristics：

☆ Patented buckle locking structure, providing higher and more stable positioning accuracy of the cantilever.

☆ Redesign (patent) of the positioning part of the polishing fixture and equipment, providing longer positioning distance, close to zero fit clearance and lower wear rate, not afraid of the size of epoxy tip and the pulling of the optical cable.

☆ In addition to structural optimization, better materials and heat treatment processes are adopted for the positioning part, which can provide more service life and better stability.

☆ The assembly positioning accuracy requirement is 3-5 times higher than that of traditional equipment.

☆ Pressure correction is available to ensure stable and consistent pressure across different batches of equipment.

☆ Can support Both Chinese and English operation interface.

Main parameters：

Overall Dimension： 520x395x405 mm

Voltage： 100-240V AC, 2A Fuse

Power： 60w

Air Source： 6 bar<=p<=9 bar, 

Recommended pre-filter accuracy:3um

Velocity range：30-180rpm (The highest speed:200rpm), 

S estion 30-165 

Rpm Slow start range：0-60’s

Pressure range： 0-9800g (The equivalent of about 0-22 LBS )

Slow start range： 0-60’s

Time range： 0-900’s

Program capacity： 15 kinds

Each program allows: 5 steps

Note: Due to technical upgrade or other reasons, Bulls keeps optimize the specific parameter or adjust without prior notice.