1、 Product standards

This product is produced in accordance with GB/T12706.1-2008 "Power cables and accessories with extruded insulation for rated voltages from 1kV to 35kV, Part 1: Cables for rated voltages of 1kV and 3kV" and GB/T 19666-2005 "General rules for flame-retardant and fire-resistant wires and cables". It can also be produced according to the recommended standards of the International Electrotechnical Commission IEC, British standards, German standards, and American standards according to user needs.

2、 Scope of application

This product is suitable for fixed installation in power distribution networks or industrial installations with a rated voltage of 0.6/1 kV and below.

3、 Usage characteristics

Power frequency rated voltage U0/U 0.6/1 kV.

The cable conductor allows for long-term high temperatures not exceeding 70 ℃.

High temperature of cable conductor during short circuit (not exceeding 5 seconds):

Conductor cross-section ≤ 300mm 2 at 160 ℃

Conductor cross-section ≥ 300mm 2 140 ℃

The ambient temperature during cable laying shall not be lower than 0 ℃.

Cable bending radius: not less than 10 times the outer diameter of the cable.