XGY-10/20 Pipe Static Hydraulic Testing Machine                   

The static hydraulic testing machine is suitable for long-term static hydraulic testing of various plastic pipes, hydraulic instantaneous burst testing of pipes, and determination of the damage resistance time of thermoplastic pipes under long-term constant pressure resistance. It is an essential testing equipment for various research institutes, quality inspection departments, and pipe manufacturers.

The hydrostatic testing machine is divided into pressure levels of 10MPa and 20MPa, and each channel does not interfere with each other.

Meet the following national standards

GB/T6111-2003 Test method for resistance to internal pressure of thermoplastic pipes for liquid transportation

GB/T15560-95 Plastic pipes for fluid transportation - Hydraulic instantaneous burst and pressure resistance test method

Simultaneously meet the following standards

Requirements of standards such as ISO 1167, GB/T15560, ASTM D1598, ISO 9080, GB/T 18252, CJ/T108-1999, and ASTM F1335.

1、 Technical parameters

1. Host pressure range: 0.001~10.000MPa 0.001~20.000MPa (adjustable as desired)

2. Number of test positions: 3 channels (the first channel can be used for both static hydraulic testing and blasting testing, and the second, third, and static hydraulic testing)

3. Control mode: operation panel/PC control

4. Host pressure resolution: 0.001MPa

5. Host constant voltage range:<+2%, -1% of the set value

6. Host constant voltage accuracy: not less than ± 1%

7. Measurement range: 5% -100% Full scale

8. The allowable error limit for indication is within 1%

9. Display resolution: 1s

10. Timing accuracy: ± 0.1%

11. Timed working time: 0-9999.59 hours

12. Water tank control range: 15-95 ℃ Room temperature -95 ℃

13. Temperature control accuracy of water tank: ± 0.1 ℃.

14. Uniformity of water tank temperature: ± 0.5 ℃.

15. Timing range: 0-9999.59 hours

16. Timing accuracy: ≤ 0.1%

17. The water tank is equipped with a short-circuit protection device made of stainless steel

18. Power supply: Pressure control host 220VAC; Pressure station three-phase 380VAC; Three phase 380VAC constant temperature medium box

19. Fixture material: 304 stainless steel