Technical parameters of 10KW gasoline generator
model
HS13000BE
hair
electric
machine
Rated power (KW)
ten
Peak power (KW)
eleven
Rated voltage (V)
230/400
Rated current (A)
12V/8.3A
Rated frequency (Hz)
fifty
Power factor
one
Rated speed (rpm)
three thousand
Adjustment method
AVR (Automatic Adjustment)
Continuous running time
eight
hair
move
machine
Engine model
HS2V78F-B
Engine type
Dual cylinder, four stroke, overhead valve, forced air cooling
Startup method
Electric start
ignition system
Transistor magnet ignition (contactless)
Fuel volume (L)
thirty
Lubricating oil volume (L)
one point five
Fuel consumption rate (g/kw · h)
≤385
Standard configuration
Large fuel tank, large muffler, large air filter, non fuse circuit breaker
Noise Db (A) (≤ 7m)
seventy-six
packing
transport
Gross weight (kg)
160/180
Dimensions (mm)
960×650×670
machine
group
place
contain
match
piece
Plug
3 of them
Sleeve
1 piece
instructions
1 book
Start key
1 piece
Battery
1 piece
Mobile marine engine handle and parts
1 set
A generator should have the characteristics of small size, low noise, and light weight. Household generators must have low noise because they are used in residential areas or relatively quiet places. The generator should not affect individuals or disturb the public. Household generators are usually used as mobile power sources when traveling, so small size and light weight are also necessary. 3. Low fuel consumption. Nowadays, oil prices have been soaring. If you buy a generator that uses more oil than your car, it is truly "oil". Hansi is a company that researches and manufactures generators, and can provide you with different specifications of small generators, household generators, gasoline generators, diesel generators, digital generators and other generator equipment and components. Now Hansi Company faces the whole country and directly delivers goods to customers without the benefit of intermediaries.
Safety inspection before power generation
1. Check if the oil level meets the specified requirements: Take out the oil level gauge, wipe the gauge clean, and confirm that the oil level is above the lower end of the gauge. If you need to add engine oil, add it to the upper limit of the oil level gauge.
2. Check if the air intake and exhaust channels are unobstructed, and if there are any foreign objects blocking or obstructing them.
3. Check whether the oil engine control panel, connecting cables and sockets, plugs are in good condition, whether the wires are cracked or insulated, and whether the screws of each pile head are tightened.
4. Check the fuel level, water level, starting battery voltage, and whether there is water leakage, electric leakage, oil leakage, or air leakage.