Product Name: GR1 titanium foil 

Material: GR1

Condition: M

Surface: Shining 

Size: 0.01-2.0MM (thickness)

Standard: 

Titanium foil: refers to sheet, strip, or roll shaped titanium materials with a thickness of less than 0.1mm.
Titanium strip: refers to a strip or roll shaped titanium material with a thickness greater than or equal to 0.1mm and less than 0.3mm.
Titanium strip roll: refers to a strip or roll shaped titanium material with a thickness greater than or equal to 0.3mm and less than 4.75mm.
Titanium foil with a thickness of less than 0.1mm;
Titanium strips with a thickness of 0.1-0.3mm and a width of less than 500mm;
Titanium coils with a thickness of 0.3mm or more and a width greater than 500mm;
Titanium coils with a thickness of 0.1-0.3mm and a width greater than 500mm;
Conventional factory standards for titanium foil:
1. The surface of the product should be smooth and clean;
2. The surface of the product is allowed to have slight darkening and localized water marks, as well as local defects such as scratches, indentations, pits, spots, and polishing marks that do not exceed half of the thickness tolerance. However, the minimum thickness should be ensured. For annealed products, local and slight scratches and wrinkles caused by degreasing are also allowed;
3. The surface of the product is not allowed to have macroscopic defects such as cracks, peeling, oxidation, folding, metal and non-metal inclusions, and traces of alkali or acid washing.
4. The strip is allowed to remove local defects along the rolling direction, but the thickness of the strip after removal shall not be less than the minimum allowable thickness.