Universal charger
For most of mobile phone battery
Parameter:
Input: AC 180-240 V, 50/60 Hz , MAX 50 mA;
Output: DC 4.2 V, 100-300mA
Use Enviroment temperature:0-40 C
Suitable for battery of 250-2500 mAh;
Characteristic:
The charger adopt the advanced switching power supply which with high efficient，
and adopt the advanced control chip circuit, can check the battery & stop charge automatic when finishing charge,can protect battery better.
Instruction:
1. Fix the battery:
First adjust the Charger hardware connector space according to the distance of battery positive pole plate and negative pole plate, make sure the battery and hardware connector in correct connection , if the “CON” is ON, it is “OK” ,Otherwise , Press the changed switch Button, then the “CON” is ON, it mean connection is ok.
2.Charge confirmation:
After connection with the battery well, please connect the charger to the 180-240 V AC power source, it indicating charge when the LED “CH” is flash.
Finish charge:
When the “CH” is OFF completely, the “FULL” become bright, it mean finished charge ,it can be take off for use。
Notice:
1.Indoor use only, please use the firm AC power source jack;
2.Avoid the high temperature, heat and direct sunshine when work;
3.Please cut off the AC power source when not use,
4.For the rechargeable battery use only, forbidden to use for UN-rechargeable battery.